19-3465; Rev 4; 3/09
1V, Low-Power, DirectDrive, Stereo Headphone
Amplifier with Shutdown
MAX9725
General Description
Features
♦ Low Quiescent Current
2.1mA (MAX9725A–MAX9725D)
2.3mA (MAX9725E)
The MAX9725A–MAX9725D fixed-gain, stereo head-
phone amplifiers are ideal for portable equipment where
board space is at a premium. The MAX9725E offers the
flexibility to adjust the gain with external input and feed-
back resistors. The MAX9725A–MAX9725E use a unique
DirectDrive architecture to produce a ground-referenced
output from a single supply, eliminating the need for large
DC-blocking capacitors, saving cost, board space, and
component height. Fixed gains of -2V/V (MAX9725A),
-1.5V/V (MAX9725B), -1V/V (MAX9725C), and -4V/V
(MAX9725D) further reduce external component count.
The adjustable gain of the MAX9725E DirectDrive head-
phone amplifier allows for any gain down to -1V/V using
external resistors.
♦ Single-Cell, 0.9V to 1.8V Single-Supply Operation
♦ Fixed Gain Eliminates External Feedback Network
MAX9725A: -2V/V
MAX9725B: -1.5V/V
MAX9725C: -1V/V
MAX9725D: -4V/V
♦ Adjustable Gain with External Input and Feedback
Resistors
MAX9725E: Minimum Stable Gain of -1V/V
♦ Ground-Referenced Outputs Eliminate DC Bias
♦ No Degradation of Low-Frequency Response Due
to Output Capacitors
♦ 20mW per Channel into 32Ω
♦ Low 0.006% THD+N
♦ High PSRR (80dB at 1kHz)
♦ Integrated Click-and-Pop Suppression
♦ Low-Power Shutdown Control
♦ Short-Circuit Protection
The MAX9725 delivers up to 20mW per channel into a
32Ω load and achieves 0.006% THD+N. An 80dB at 1kHz
power-supply rejection ratio (PSRR) allows the MAX9725
to operate from noisy digital supplies without an additional
linear regulator. The MAX9725 includes 8kV ESD protec-
tion on the headphone output. Comprehensive click-and-
pop circuitry suppresses audible clicks and pops at
startup and shutdown. A low-power shutdown mode
reduces supply current to 0.6µA (typ).
The MAX9725 operates from a single 0.9V to 1.8V supply,
allowing the device to be powered directly from a single
AA or AAA battery. The MAX9725 consumes only
2.1mA of supply current, provides short-circuit protection,
and is specified over the extended -40°C to +85°C tem-
perature range. The MAX9725 is available in a tiny
(1.54mm x 2.02mm x 0.6mm) 12-bump chip-scale
package (UCSP™) and a 12-pin thin QFN package
(4mm x 4mm x 0.8mm).
♦
8kV ESD-Protected Amplifier Outputs
♦ Available in Space-Saving Packages
12-Bump UCSP (1.54mm x 2.02mm x 0.6mm)
12-Pin Thin QFN (4mm x 4mm x 0.8mm)
Block Diagrams
SINGLE
C3
V
DD
1.5V CELL
AA OR AAA
BATTERY
MAX9725A–MAX9725D
Applications
DirectDrive OUTPUTS
ELIMINATE DC-BLOCKING
CAPACITORS.
MP3 Players
Cellular Phones
PDAs
Smart Phones
INL
Portable Audio Equipment
OUTL
Ordering Information
C1P
C1N
PV
SS
INVERTING
CHARGE PUMP
TOP
MARK
GAIN
(V/V)
PART
PIN-PACKAGE
C2
V
SS
MAX9725AEBC+TG45
MAX9725AETC+
12 UCSP
+ACK
+AAEW
+ACL
-2
-2
12 TQFN-EP*
12 UCSP
OUTR
INR
MAX9725BEBC+TG45
-1.5
Ordering Information continued at end of data sheet.
Note: All devices are specified over the -40°C to +85°C operating
temperature range.
SGND
PGND
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.
UCSP is a trademark of Maxim Integrated Products, Inc.
Block Diagrams continued at end of data sheet.
Pin Configurations appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.