EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX96700
14-Bit GMSL Deserializer
with Coax or STP Cable Input
General Description
Benefits and Features
● Ideal for Safety Camera Applications
The MAX96700 is a compact deserializer especially suit-
ed for automotive camera applications. Features include
adaptive equalization and an output crosspoint switch. An
embedded control channel operates at 9.6kbps to 1Mbps
• Works with Low-Cost 50Ω Coax (100Ω STP) Cables
• Error Detection of Video/Control Data
• High-Immunity Mode for Robust Control-Channel
EMC Tolerance
• Retransmission of Control Data Upon Error
• Best-in-Class Supply Current: 190mA (max)
• Adaptive Equalization for 15m Cables at Full Speed
• 32-Pin (5mm x 5mm) TQFN Package
• Horizontal- and Vertical-Sync Encoding
and Tracking
2
2
in UART, I C, and mixed UART/I C modes, allowing pro-
gramming of serializer, deserializer (SerDes), and camera
registers, independent of video timing.
The deserializer can track data from a spread-
spectrum serial input. The serial input meets ISO 10605
and IEC 61000-4-2 ESD standards. The core supply
range is 1.7V to 1.9V and the I/O supply range is 1.7V
to 3.6V. The device is available in a 32-pin (5mm x 5mm)
TQFN package with 0.5mm lead pitch, and operates over
the -40°C to +115°C temperature range.
● High-Speed Deserialization for Megapixel Cameras
• Up to 1.74Gbps Serial-Bit Rate
• 6.25MHz to 87MHz x 12-Bit + H/V Data
• 36.66MHz to 116MHz x 12-Bit + H/V Data
(through Internal Encoding)
Applications
● Automotive Camera Applications
● Multiple Modes for System Flexibility
2
• 9.6kbps to 1Mbps Control Channel in UART, I C
2
(with Clock Stretch), or UART-to-I C Modes
• 2:1 Input Mux for Camera Selection
• 15 Hardware-Selectable I C-Device Addresses
Simplified Block Diagram
2
• Pairs with Any Maxim GMSL Serializer
• Crosspoint Switch Maps Data to Any Output
● Reduces EMI and Shielding Requirements
VIDEO
VIDEO
• Spread-Spectrum Serial-Input Tracking and Transfer
to the Parallel Output
CAM
MAX96701
MAX96700
GPU
• 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
● Peripheral Features for System Verification
2
2
I C
I C
• Built-In PRBS Receiver for BER Testing
• Eye-Width Monitor Allows In-System Test of
High-Speed Serial Link
• Dedicated “Up/Down” GPI for Camera Frame-Sync
Trigger and Other Uses
● Meets AEC-Q100 Automotive Specification
• -40°C to +115°C Operating Temperature Range
• ±8kV Contact and ±15kV Air IEC 61000-4-2 and
ISO 10605 ESD Protection
Ordering Information appears at end of data sheet.
19-100065; Rev 0; 6/17