EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX96701
14-Bit GMSL Serializer with High-Immunity/
Bandwidth Mode and Coax/STP Cable Drive
General Description
Benefits and Features
The MAX96701 is a compact serializer in a 4mm x 4mm
TQFN package especially suited for automotive camera
applications. In high-bandwidth mode, the parallel-clock
maximum is 116MHz for 12-bit linear or combined HDR
data types.
● Ideal for Safety Camera Applications
• Works with Low-Cost 50Ω Coax (100Ω STP) Cables
• Error Detection of Video/Control Data
• High-Immunity Mode for Robust Control-Channel
EMC Tolerance
• Retransmission of Control Data Upon Error
Detection
• Best-in-Class Supply Current: 88mA (max)
• Pre/Deemphasis Allows 15m Cable at Full Speed
• 24-Pin (4mm x 4mm) TQFN Package with 0.5mm
Lead Pitch
The embedded control channel operates at 9.6kbps to
1Mbps in I C mode, allowing programming of serializer,
deserializer (SerDes), and camera registers independent
of video timing.
2
For driving longer cables, the IC has programmable
pre/deemphasis. Programmable spread spectrum is
available on the serial output. The serial output meets
ISO 10605 and IEC 61000-4-2 ESD standards. The
supply range is 1.7V to 1.9V.
● High-Speed Data Serialization for Megapixel
Cameras
• Up to 1.74Gbps Serial-Bit Rate
• 12.5MHz to 116MHz x 12-Bit + H/V Data
The MAX96701 is available in a 24-pin TQFN package
with 0.5mm lead pitch, and operates over the -40°C to
+115°C temperature range.
● Multiple Modes for System Flexibility
2
• 9.6kbps to 1Mbps Control Channel in I C Mode
(with Clock Stretch)
• Crosspoint Switch Accepts Any Input Bitmap
• Modes for Encoded VSYNC and HSYNC
Applications
● Automotive Camera Applications
● Reduces EMI and Shielding Requirements
• Programmable Output Spread Spectrum
• Tracks Spread Spectrum Applied at the Parallel
Input
Simplified Block Diagram
• 1.7V to 1.9V I/O Supply
● Peripheral Features for Camera Power-Up and
Verification
VIDEO
VIDEO
• Built-In PRBS Generator for BER Testing
• Dedicated GPO for Camera Frame-Sync Trigger
and Other Uses
CAM
MAX96701
MAX96700
GPU
2
2
• Remote/Local Wake-Up from Sleep Mode
I C
I C
● Meets AEC-Q100 Automotive Specification
• -40°C to +115°C Operating Temperature
• ±8kV Contact and ±15kV Air IEC 61000-4-2 and
ISO 10605 ESD Protection
Ordering Information appears at end of data sheet.
19-100066; Rev 0; 6/17