19-0344; Rev 4; 12/99
3-Pin Microprocessor Reset Circuits
General Description
____________________________Features
ꢀ Precision Monitoring of +2.5V, +3V, +3.3V, and
The MAX803/MAX809/MAX810 are microprocessor (µP)
supervisory circuits used to monitor the power supplies
in µP and digital systems. They provide excellent circuit
reliability and low cost by eliminating external compo-
nents and adjustments when used with +5V, +3.3V,
+3.0V, or +2.5V-powered circuits.
+5V Power-Supply Voltages
ꢀ Fully Specified Over Temperature
ꢀ Available in Three Output Configurations
Open-Drain RESET Output (MAX803)
Push-Pull RESET Output (MAX809)
Push-Pull RESET Output (MAX810)
ꢀ 140ms min Power-On Reset Pulse Width
ꢀ 12µA Supply Current
ꢀ Guaranteed Reset Valid to VCC = +1V
ꢀ Power Supply Transient Immunity
ꢀ No External Components
These circuits perform a single function: they assert a
reset signal whenever the V
supply voltage declines
CC
below a preset threshold, keeping it asserted for at
least 140ms after V has risen above the reset thresh-
CC
old. Reset thresholds suitable for operation with a vari-
ety of supply voltages are available.
The MAX803 has an open-drain output stage, while the
MAX809/MAX810 have push-pull outputs. The
MAX803’s open-drain RESET output requires a pull-up
resistor that can be connected to a voltage higher than
ꢀ 3-Pin SC70 and SOT23 Packages
Ordering Information
V
CC
. The MAX803/MAX809 have an active-low RESET
PART
TEMP. RANGE
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
-40°C to +105°C
PIN-PACKAGE
3 SC70-3
output, while the MAX810 has an active-high RESET
output. The reset comparator is designed to ignore fast
MAX803_EXR-T
MAX803_EXR-T10
MAX809_EXR-T
MAX809_EXR-T10
MAX809_EUR-T
MAX809_EUR-T10
MAX810_EXR-T
MAX810_EXR-T10
MAX810_EUR-T
MAX810_EUR-T10
transients on V , and the outputs are guaranteed to
CC
3 SC70-3
be in the correct logic state for V
down to 1V.
CC
3 SC70-3
Low supply current makes the MAX803/MAX809/
MAX810 ideal for use in portable equipment. The
MAX803 is available in a 3-pin SC70 package, and the
MAX809/MAX810 are available in 3-pin SC70 or SOT23
packages.
3 SC70-3
3 SOT23-3
3 SOT23-3
3 SC70-3
3 SC70-3
Applications
3 SOT23-3
3 SOT23-3
Computers
Controllers
Note: These parts are offered in 2.5k or 10k reels, and must be
ordered in 2.5k or 10k increments. Order MAX803_EXR-T for
2.5k reels and MAX803_EXR-T10 for 10k reels. Insert the
desired suffix letter from the Selector Guide into the blank to
complete the part number. All versions of these products may
not be available at the time of announcement. Contact factory for
availability.
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable/Battery-Powered Equipment
Automotive
Pin Configuration
Typical Operating Circuit
TOP VIEW
V
CC
1
2
GND
V
V
CC
CC
R
*
PULL-UP
MAX803
MAX809
MAX810
MAX803
MAX809
µP
V
CC
3
RESET
INPUT
RESET
RESET (RESET)
GND
GND
SC70-3/SOT23-3
( ) ARE FOR MAX810.
MAX803 AVAILABLE IN SC70-3 ONLY.
*MAX803 ONLY
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.