The MAX809 and MAX810 are cost–effective system supervisor
circuits designed to monitor VCC in digital systems and provide a reset
signal to the host processor when necessary. No external components
are required.
http://onsemi.com
The reset output is driven active within 20 µsec of VCC falling
through the reset voltage threshold. Reset is maintained active for a
minimum of 140msec after VCC rises above the reset threshold. The
MAX810 has an active–high RESET output while the MAX809 has
an active–low RESET output. The output of the MAX809 is
guaranteed valid down to VCC = 1V. Both devices are available in a
SOT–23 package.
The MAX809/810 are optimized to reject fast transient glitches on
the VCC line. Low supply current of 17µA (VCC = 3.3V) makes these
devices suitable for battery powered applications.
SOT–23
(TO–236)
CASE 318
PIN CONFIGURATION
(Top View)
Features
• Precision VCC Monitor for 3.0V, 3.3V, and 5.0V Supplies
• 140msec Guaranteed Minimum RESET, RESET
Output Duration
GND
1
• RESET Output Guaranteed to VCC = 1.0V (MAX809)
V
CC
3
• Low 17µA Supply Current
• VCC Transient Immunity
• Small SOT–23 Package
RESET
(RESET)**
2
• No External Components
• Wide Operating Temperature: –40°C to 85°C
SOT–23*
NOTE: *SOT–23 is equivalent to JEDEC (TO–236)
** RESET is for MAX809
Typical Applications
• Computers
** RESET is for MAX810
• Embedded Systems
• Battery Powered Equipment
• Critical µP Power Supply Monitoring
ORDERING INFORMATION
Device
Package
Shipping
TYPICAL APPLICATION DIAGRAM
MAX809xTR
SOT–23
3000 Tape/Reel
V
CC
MAX810xTR
SOT–23
3000 Tape/Reel
V
V
CC
CC
MAX809
RESET
PROCESSOR
NOTE: The ”x” denotes a suffix for V
see table below
threshold –
CC
RESET
INPUT
Suffix
Reset V Threshold (V)
CC
GND
GND
L
4.63
4.38
4.00
3.08
2.93
2.63
M
J*
T
S
R
NOTE: *J version is available for MAX809 only
Semiconductor Components Industries, LLC, 1999
1
Publication Order Number:
February, 2000 – Rev. 2
MAX809/D
Powered by ICminer.com Electronic-Library Service CopyRight 2003