EVALUATION KIT AVAILABLE
MAX30110
Optimized Pulse-Oximeter and
Heart Rate AFE forWearable Health
● Receive Section
General Description
• 19-bit Optical ADC Path to Support the Lowest
Perfusions Situations
• Low 25pA-RMS Input Referred Noise to Minimize
LED Power Under Most Conditions
The MAX30110 is a complete optical pulse oximetry and
heart rate detection integrated analog front-end. The
MAX30110 has a high-resolution, optical readout signal-
processing channel with built-in ambient light cancellation,
aswellashigh-currentLEDdriverDACs,toformacomplete
optical readout signal chain. With external LED(s) and
photo diode(s), the MAX30110 offers the lowest power,
highest performance heart rate detection solution for wrist
applications.
• High Ambient Light Input Range of 200μA and
to Support Extraction of HRM Signal in the Most
Adverse Lighting Conditions
• Built-in Front And Back-End Ambient Light Cancellation,
Improving Rejection and Eliminating System
Complexity of Dealing with Ambient Light
• Short Exposure Pulse Widths of 52μs, 104μs,
206μs, 417μs for Efficient Uses of LED Light
• Multiple Sample Rate Options from 20sps to
3.2ksps
The MAX30110 operates on a 1.8V main supply voltage,
with a separate 3.1V to 5.25V LED driver power supply.
The device supports a standard SPI compatible interface,
as well as shutdown modes through the software with
near-zero standby current, allowing the power rails to
remain powered at all times.
● Ultra-Low-Power Operation for Mobile and Body-
Wearable Device
• Dynamic Power-Down Modes to 100sps for
Low-Power Consumption
• Full AFE Power Consumption of Less Than 25μA
(Typ) at 25sps
Applications
● Wrist-Worn Wearable Devices
● In-Ear Wearable Devices
• Large 32 Sample FIFO to Support Batch Processing
in the Microcontroller
• Variety of System Monitors Mappable to Interrupts
to Off-Load System Monitoring Functions From the
Microcontroller
● SpO Monitoring Devices
2
● Fitness Wearable Devices
Benefits and Features
● Reflective or Transmissive Heart Rate, Heart Rate
• Low Shutdown Current = 1.4μA (typ)
Variability, or SpO Monitoring
2
● SPI Interface
● Transmit Section
● Supports a Single 1.8V Supply with Separate 3.1V to
• Two 8-bit LED Current DACs
5.25V LED Supply
• Four Current Ranges 50mA, 100mA, 150mA, 200mA
• Low Noise Current Sources for High Peak Transmit
to Receive Dynamic Range
● Miniature 2.8mm x 2.0mm, 6x4, 0.4mm Ball Pitch
WLP Package
• Low 160mV Dropout to Support Direct Drive From
Rechargeable Li Battery
● -40°C to +85°C Operating Temperature Range
• High Output Impedance and High Supply Rejection
to Support Unregulated Supply or Direct Drive
From Boost Switcher Supply
Ordering Information appears at end of data sheet.
19-100092; Rev 0; 6/17