Data Sheet
MAX30131/MAX30132/MAX30134
1-, 2-, 4-Channel, Ultra-Low Power Electrochemical Sensor AFEs
General Description
Benefits and Features
● Multichannel Operation
The MAX30131/MAX30132/MAX30134 are 1-, 2-, and 4-chan-
nel (respectively) ultra-low power programmable analog front
ends (AFE) for use with electrochemical sensors. The devices
provide the biasing and complete measurement path, includ-
ing the analog to digital converters (ADCs). The flexibility of
the MAX30131/MAX30132/MAX30134 enables them to work
with both two and three terminal electrochemical sensors,
providing both DC current measurement and electrochemical
impedance spectroscopy (EIS) measurement capability. The
devices include an internal temperature sensor and program-
mable voltage reference to support external temperature
monitoring, and an external reference source to integrate
voltage monitoring of bias and supply voltages for safety and
compliance.
• Up to Four Independent DC Channels
• 1 Switchable EIS Channel
● High Accuracy and Precision
• Up to Four 12-Bit Voltage DACs
• Up to Four 16-Bit Current ADCs
- Programmable 0.8pA to 30pA Resolution
• One 16-Bit EIS ADC
- Programmable 0.014Hz to 27kHz Sine Wave Drive
• 12-Bit Voltage System ADC
• 16-Bit Temperature Sensor
• Programmable, 30ppm/°C Voltage Reference
● Autonomous Modes with 256 Word Configurable FIFO
and Programmable Alarm
The MAX30131/MAX30132/MAX30134 support single-, dual-,
and quad- two-terminal or three-terminal electrochemical sen-
sors, respectively. Ultra-low power allows for the continuous
biasing of the sensor to maintain accuracy and fast response
when a measurement is required. The MAX30131/MAX30132/
MAX30134 operate over a 1.73V to 5.0V voltage range. Total
current consumption can be less than 5μA depending on the
configuration, measurement frequency, and number of sen-
sors. Communication is through a 4-pin SPI serial interface
plus a configurable interrupt pin and four configurable general
purpose input/outputs (GPIOs) for direct control of internal
functions.
● Long Battery Life for 2- and 3-Terminal Sensors
• 3.5μA Continuous Bias Supply Current for Single 2-
or 3-Terminal Sensor
• Add 0.25μA for Each Additional Sensor
● Small Size
• 25-Bump WLP 2.93mm x 2.93mm
● Safety and Compliance
• Monitor Sensor Bias Voltages for Compliance
• Monitor Supply/Battery Voltage and Temperature
● Simple and Robust Digital Interface
• 8MHz 4-Wire SPI Interface
• Programmable Interrupt
The MAX30131/MAX30132/MAX30134 are available in a
25-bump WLP package and operate over a 0°C to +70°C
temperature range.
• Four Programmable GPIOs
● IEC61000-4-2 ESD: ±15kV Air, ±8kV Contact On Sensor
Pins
Applications
● Electrochemical Sensors
● Continuous Glucose Monitors
● Sweat Sensors
● Wearable Devices
Visit Web Support to complete the nondisclosure agreement (NDA) required to receive additional product information.
Rev. 4
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices
DOCUMENT FEEDBACK
for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change
without notice. No license is granted by implicationor otherwise under any patent or patent rights of Analog Devices. Trademarks andregistered
trademarks are the property of their respective owners.
TECHNICAL SUPPORT