M271
1 Form A
DESCRIPTION
The M271 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay in a miniature 4-pin small outline
package. It is designed to be a cost-effective replacement of reed relays in low voltage applications. The relay consists of an integrated
circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The
output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for
switching lamps and highly inductive loads.
FEATURES
APPLICATIONS
Ultra miniature 4-pin small outline package
Low input control power consumption (3mA TYP)
10 ohms maximum on-resistance
60V load voltage rating
Reed relay replacement
•
•
•
•
•
•
•
•
•
•
•
•
Meter reading systems
Medical equipment
Battery monitoring
Multiplexers
125mA maximum continuous load current
High input-to-output isolation (1500V MIN)
Long life/high reliability
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
Storage Temperature
Operating Temperature
UNIT
°C
MIN
-55
-40
TYP
MAX
125
85
-TR Tape and Reel
•
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
°C
SCHEMATIC DIAGRAM
Continuous Forward
Current
mA
A
50
Peak Forward Current
1
(1us)
Reverse Input Control
Voltage
V
5
Output Power Dissipation
mW
400
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
UL / C-UL Approved (File # E201932)
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
M271
rev 1.40 (10/25/2004)