5秒后页面跳转
M24C01-RBN3P PDF预览

M24C01-RBN3P

更新时间: 2024-01-11 08:39:15
品牌 Logo 应用领域
意法半导体 - STMICROELECTRONICS 存储内存集成电路光电二极管双倍数据速率可编程只读存储器电动程控只读存储器电可擦编程只读存储器
页数 文件大小 规格书
25页 451K
描述
16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

M24C01-RBN3P 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:DIP包装说明:PLASTIC, DIP-8
针数:8Reach Compliance Code:not_compliant
ECCN代码:EAR99HTS代码:8542.32.00.51
风险等级:5.75最大时钟频率 (fCLK):0.4 MHz
JESD-30 代码:R-PDIP-T8JESD-609代码:e0
长度:9.27 mm内存密度:1024 bit
内存集成电路类型:EEPROM内存宽度:8
功能数量:1端子数量:8
字数:128 words字数代码:128
工作模式:SYNCHRONOUS最高工作温度:125 °C
最低工作温度:-40 °C组织:128X8
封装主体材料:PLASTIC/EPOXY封装代码:DIP
封装形状:RECTANGULAR封装形式:IN-LINE
并行/串行:SERIAL峰值回流温度(摄氏度):NOT SPECIFIED
认证状态:Not Qualified座面最大高度:5.33 mm
串行总线类型:I2C最大供电电压 (Vsup):5.5 V
最小供电电压 (Vsup):1.8 V标称供电电压 (Vsup):2.5 V
表面贴装:NO技术:CMOS
温度等级:AUTOMOTIVE端子面层:Tin/Lead (Sn/Pb)
端子形式:THROUGH-HOLE端子节距:2.54 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:7.62 mm最长写入周期时间 (tWC):10 ms

M24C01-RBN3P 数据手册

 浏览型号M24C01-RBN3P的Datasheet PDF文件第7页浏览型号M24C01-RBN3P的Datasheet PDF文件第8页浏览型号M24C01-RBN3P的Datasheet PDF文件第9页浏览型号M24C01-RBN3P的Datasheet PDF文件第11页浏览型号M24C01-RBN3P的Datasheet PDF文件第12页浏览型号M24C01-RBN3P的Datasheet PDF文件第13页 
M24C16, M24C08, M24C04, M24C02, M24C01  
Figure 10. Read Mode Sequences  
ACK  
NO ACK  
DATA OUT  
CURRENT  
ADDRESS  
READ  
DEV SEL  
R/W  
ACK  
ACK  
ACK  
NO ACK  
DATA OUT  
RANDOM  
ADDRESS  
READ  
DEV SEL *  
BYTE ADDR  
DEV SEL *  
R/W  
R/W  
ACK  
ACK  
ACK  
NO ACK  
DATA OUT N  
SEQUENTIAL  
CURRENT  
READ  
DEV SEL  
DATA OUT 1  
R/W  
ACK  
ACK  
ACK  
ACK  
SEQUENTIAL  
RANDOM  
READ  
DEV SEL *  
BYTE ADDR  
DEV SEL * DATA OUT 1  
R/W  
R/W  
ACK  
NO ACK  
DATA OUT N  
AI01942  
st  
rd  
Note: The seven most significant bits of the Device Select Code of a Random Read (in the 1 and 3 bytes) must be identical.  
Read Operations  
Read operations are performed independently of  
the state of the Write Control (WC) signal.  
dressed byte. The bus master must not  
acknowledge the byte, and terminates the transfer  
with a Stop condition.  
Current Address Read  
The device has an internal address counter which  
is incremented each time a byte is read.  
Random Address Read  
A dummy Write is first performed to load the ad-  
dress into this address counter (as shown in Fig-  
ure 10.) but without sending a Stop condition.  
Then, the bus master sends another Start condi-  
tion, and repeats the Device Select Code, with the  
Read/Write bit (RW) set to 1. The device acknowl-  
edges this, and outputs the contents of the ad-  
For the Current Address Read operation, following  
a Start condition, the bus master only sends a De-  
vice Select Code with the Read/Write bit (RW) set  
to 1. The device acknowledges this, and outputs  
the byte addressed by the internal address  
counter. The counter is then incremented. The bus  
master terminates the transfer with a Stop condi-  
tion, as shown in Figure 10., without acknowledg-  
ing the byte.  
10/25  

与M24C01-RBN3P相关器件

型号 品牌 描述 获取价格 数据表
M24C01-RBN3P/S STMICROELECTRONICS 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

获取价格

M24C01-RBN3P/W STMICROELECTRONICS 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

获取价格

M24C01RBN3T STMICROELECTRONICS 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

获取价格

M24C01-RBN3T STMICROELECTRONICS 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

获取价格

M24C01-RBN3T/G STMICROELECTRONICS 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

获取价格

M24C01-RBN3T/S STMICROELECTRONICS 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM

获取价格