v1.0
®
Military ProASIC3/EL Low-Power Flash FPGAs
with Flash*Freeze Technology
Advanced and Pro (Professional) I/Os††
Features and Benefits
• 700 Mbps DDR, LVDS-Capable I/Os
†
Military Temperature Tested and Qualified
• Each Device Tested from –55°C to 125°C
Firm-Error Immune
• 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V Mixed-Voltage Operation
• Bank-Selectable I/O Voltages—up to 8 Banks per Chip
• Single-Ended I/O Standards: LVTTL, LVCMOS 3.3 V /
2.5 V / 1.8 V / 1.5 V / 1.2 V, 3.3 V PCI / 3.3 V PCI-X, and
• Not Susceptible to Neutron-Induced Configuration Loss
†
LVCMOS 2.5 V / 5.0 V Input
Low Power
• Differential I/O Standards: LVPECL, LVDS, BLVDS, and M-LVDS
• Voltage-Referenced I/O Standards: GTL+ 2.5 V / 3.3 V, GTL
2.5 V / 3.3 V, HSTL Class I and II, SSTL2 Class I and II, SSTL3
Class I and II (A3PE3000L only)
• Dramatic Reduction in Dynamic and Static Power
• 1.2 V to 1.5 V Core and I/O Voltage Support for Low Power
†
• Low Power Consumption in Flash*Freeze Mode Allows for
Instantaneous Entry To / Exit From Low-Power Flash*Freeze
• I/O Registers on Input, Output, and Enable Paths
• Hot-Swappable and Cold-Sparing I/Os
• Programmable Output Slew Rate and Drive Strength
• Programmable Input Delay (A3PE3000L only)
• Schmitt Trigger Option on Single-Ended Inputs (A3PE3000L)
• Weak Pull-Up/-Down
• IEEE 1149.1 (JTAG) Boundary Scan Test
• Pin-Compatible Packages across the Military ProASIC®3EL
Family
Clock Conditioning Circuit (CCC) and PLL
• Six CCC Blocks, One with Integrated PLL (ProASIC3) and All
with Integrated PLL (ProASIC3EL)
ƒ
Mode
• Supports Single-Voltage System Operation
H•ighLowCa-Imppaecditaynce Switches
• 600 k to 3 M System Gates
• Up to 504 kbits of True Dual-Port SRAM
• Up to 620 User I/Os
Reprogrammable Flash Technology
• 130-nm, 7-Layer Metal (6 Copper), Flash-Based CMOS Process
• Live-at-Power-Up (LAPU) Level 0 Support
• Single-Chip Solution
H•ighRePtaeinrsfoPrromgraamncmeed Design when Powered Off
• 350 MHz (1.5 V systems) and 250 MHz (1.2 V systems) System
Performance
• Configurable
Phase
Shift, Multiply/Divide,
Delay
Capabilities, and External Feedback
• Wide Input Frequency Range 1.5 MHz to 250 MHz (1.2 V
systems) and 350 MHz (1.5 V systems)
• 3.3 V, 66 MHz, 66-Bit PCI (1.5 V systems) and 66 MHz, 32-Bit
SRAMs and FIFOs
PCI (1.2 V systems)
• Variable-Aspect-Ratio 4,608-Bit RAM Blocks (×1, ×2, ×4, ×9,
and ×18 organizations available)
In-System Programming (ISP) and Security
• Secure ISP Using On-Chip 128-Bit Advanced Encryption
Standard (AES) Decryption via JTAG (IEEE 1532–compliant)
• True Dual-Port SRAM (except ×18)
• 24 SRAM and FIFO Configurations with Synchronous
Operation:
®
to Secure FPGA Contents
H•ighFla-PsheLrofcokrmance Routing Hierarchy
• Segmented, Hierarchical Routing and Clock Structure
• High-Performance, Low-Skew Global Network
• Architecture Supports Ultra-High Utilization
– 250 MHz: For 1.2 V Systems
– 350 MHz: For 1.5 V Systems
ARM® Processor Support in ProASIC3/EL FPGAs
• ARM Cortex™-M1 Soft Processor Available with or without
Debug
Table 1-1 • Military ProASIC3/EL Low-Power Devices
ProASIC3/EL Devices
ARM Cortex-M1 Devices
System Gates
A3PE600L
A3P1000
A3PE3000L
1
M1A3P1000
M1A3PE3000L
600 k
13,824
108
24
1 M
24,576
144
32
3 M
75,264
504
112
1 k
VersaTiles (D-flip-flops)
RAM kbits (1,024 bits)
4,608-Bit Blocks
FlashROM Bits
1 k
1 k
Yes
1
2
Yes
6
Yes
6
Secure (AES) ISP
Integrated PLL in CCCs
VersaNet Globals
I/O Banks
18
18
18
8
4
8
Maximum User I/Os
Package Pins
270
154
620
PQFP
FBGA
PQ208
FG144
FG484
FG484, FG896
Notes:
1. Refer to the Cortex-M1 product brief for more information.
2. AES is not available for ARM-enabled ProASIC3/EL devices.
†
ƒ
A3P1000 only supports 1.5 V core operation.
Flash*Freeze technology is not available for A3P1000.
†† Pro I/Os are not available on A3P1000.
August 2008
i
© 2008 Actel Corporation