LX8384x-xx
ꢀꢁꢂꢃꢁꢂꢁꢄꢅꢆ
5A Low Dropout Positive Regulators
A
M I C R O S E M I
C O M P A N Y
PRODUCTION
available and specified in the Available
Options table below.
Three-Terminal Adjustable Or
Fixed Output
Guaranteed < 1.3V Headroom a
5A (LX8384A)
Guaranteed 2.0% Max.
Reference Tolerance (LX8384A)
Guaranteed 1.0% Max.
Reference Tolerance (LX8384B)
0.015% Line Regulation
0.15% Load Regulation
The LX8384/84A/84B Series ICs are
positive regulators designed to provide 5A
output current. These regulators yield
higher efficiency than currently available
devices with all internal circuitry designed
to operate down to a 1V input-to-output
differential. In each of these products, the
dropout voltage is fully specified as a
function of load current. Dropout is
guaranteed at a maximum of 1.3V (8384A)
and 1.5V (8384) at maximum output
current, decreasing at lower load currents.
In addition, on-chip trimming adjusts the
reference voltage tolerance to 1% maximum
at room temperature and 2% maximum over
the 0 to 125°C range for the LX8384A,
making this ideal for the Pentium P54C-
VRE specification. The LX8384B offers
0.8% tolerance at room temperature and
1.0% maximum over line, load and
The LX8384/84A/84B Series devices are
pin-compatible with earlier 3-terminal
regulators, such as the 117 series products,
but they do require input and output
capacitors. A minimum 10µF capacitor is
required on the input and a 15µF or greater
on the output of these new devices for
stability. Although, these capacitors are
generally included in most regulator
designs.
The LX8384/84A/84B Series quiescent
current flows into the load, thereby
increasing efficiency. This feature contrasts
with PNP regulators where up to 10% of the
output current is wasted as quiescent
current. The LX8384-xxI is specified over
the industrial temperature range of -25°C to
125°C, while the LX8384-xxC/84A-
xxC/84B-xxC is specified over the
commercial range of 0°C to 125°C.
Mcrosemi
.
Pentium® Processor VRE
Application
High Efficiency Linear
Regulators
Power Regulators For Switching
Power Supplies
Battery Chargers
temperature.
Fixed versions are also
Constant Current Regulators
Cyrix® 6x86™
AMD-K5™
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
IN
OUT
3.5V
5V
LX8384A
at 5A
+
LX8384/84A/84B-00
LX8384/84A/84B-15
LX8384/84A/84B-33
Adjustable
1.5V
Ω
121
*1500µF
0.1%
6MV1500GX
Sanyo
ADJ
+
1500µF
5x 6MV1500GX
Sanyo
3.3V
Ω
218
0.1%
Table 1
- Available Options
Ω
* Capacitors must have < 20m
Total ESR for the VRE Specification
An Application of the LX8384A for the Pentium P54C Processors Meeting VRE Specification.
Max Ref Max Dropout
Plastic TO-220 Plastic TO-263
DD
3-Pin 3-Pin
Plastic TO-252
(D-Pak) 3-Pin
TA (°C)
DT
P
Accuracy
Voltage
0 to 125
2.0%
2.0%
1.0%
1.5V
1.3V
1.3V
1.5V
LX8384-xxCDT
LX8384A-xxCDT
LX8384B-xxCDT
LX8384-xxIDT
LX8384-xxCP
LX8384-xxCDD
LX8384A-xxCDD
LX8384B-xxCDD
LX8384-xxIDD
LX8384A-xxCP
LX8384B-xxCP
LX8384-xxIP
-25 to 125 2.0%
Note: Available in Tape & Reel.
Append the letter “T” to the part number. (i.e. LX8384-xxCPT)
Copyright 2000
Rev. 2.1d, 2001-03-15
Microsemi
Page 1
Linfinity Microelectronics Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570