POWER
LPS360-M Series
Low Power Data Sheet
360 Watt AC-DC Power Supply
Total Power: 200 - 360 W
Input Voltage: 90 - 264 Vac
120 - 300 Vdc
Outputs:
Single
SPECIAL FEATURES
Medical and ITE safeties
Active power factor correction
3” x 5” footprint
Less than 1U high
EN61000-3-2 compliant
Remote sense
Electrical Specifications
Input
Input range
Frequency
Inrush current
Efficiency
EMI/RFI
90 - 264 Vac; 120 - 300 Vdc
47 - 63 Hz
Power fail
Adjustable main output
50 A max., cold start @ 25 °C
Up to 93% at full load
Level B Conducted EMI - Class I
or Class II inputs
FCC Class B conducted; CISPR22 Class B conducted;
EN55022 Class B conducted; VDE0878PT3 Class B conducted
Overvoltage protection
Overload protection
Thermal overload protection
12 V fan output
Power factor
0.99 typical
Safety ground leakage
current
150 µA @ 132 Vac, 60 Hz for class I, 300 µA @ 264 Vac, 60 Hz for class II
LPX200 enclosure kit available
5 V Standby output
Remote Inhibit
Output
Maximum power
Adjustment range
200 - 240 W (see de-rating) for convection, 360 W with 400 LFM of forced air
12 V and 24 V models, -0%, +15%; 15 V and 48 V models, -5%, +10%;
36 V model, -15%, +0%
PMBus commands
Standby output
Fan output
5 V @ 1A convection, 2 A with forced air
12 V @ 0.5 A convection, 1 A forced air
20 ms @240 W, 220 Vac input; 12 ms @ 360 W
RoHS compliant
Digital I2C interface
Hold-up time
Designed to meet Class I and
Class II
Overload protection
Short circuit protection on all outputs. Case overload protected @ 110 - 160%
above rating
Dual AC fuses
Overvoltage protection
Logical Control
Power failure
15 - 50% above nominal output
Suitable for BF Type applications
SAFETY
TUV
UL
Open collector logic signal goes high 100 - 500 msec after main output;
it goes low at least 6 msec before loss of regulation
60950, 60601-1
60950, 60601-1
60950, 60601-1
Certificate & report
Mark (LVD & EMC)
Approval
Remote sense
Compensates for 0.5 V lead drop min. Will operate without remote sense
connected. Reverse connection protected.
cULus
CB
CE
CCC