Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1698-1
Shielded Power Inductors
–
LPS4010
Halogen
Free
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.0 mm tall
• AEC-Q200 Grade 1 (–40°C to +125°C)
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 50 mg
AEC
+
Q200 125°C
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85ꢀ relative humidity)
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 1.45 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR
max3
SRF
L2
typ4 10% 20% 30% 20°C 40°C
LPS4010-224MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
(µH)
(Ohms) (MHz) drop drop drop
rise
rise
LPS4010-381NR_
LPS4010-601NR_
LPS4010-861NR_
LPS4010-122NR_
LPS4010-152NR_
0.38 30ꢀ 0.028
0.60 30ꢀ 0.034
0.86 30ꢀ 0.043
1.2 30ꢀ 0.066
1.5 30ꢀ 0.088
350
240
204
173
140
4.30 4.40 4.50
3.50 3.60 3.70
3.00 3.10 3.20
2.50 2.60 2.70
2.10 2.20 2.30
2.45
2.30
2.00
1.70
1.40
3.35
3.10
2.70
2.20
1.90
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel). Quantities less than
full reel available: in tape (not
LPS4010-222MR_
LPS4010-332MR_
LPS4010-472MR_
LPS4010-562MR_
LPS4010-682MR_
2.2 20ꢀ 0.100
3.3 20ꢀ 0.140
4.7 20ꢀ 0.245
5.6 20ꢀ 0.260
6.8 20ꢀ 0.311
112
91
72
70
59
1.90 2.00 2.10
1.50 1.60 1.70
1.20 1.30 1.40
1.10 1.20 1.30
1.00 1.10 1.20
1.30
1.15
1.75
1.55
machine ready) or with leader and
trailer ($25 charge).
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
0.850 1.15
0.800 1.10
0.750 1.00
LPS4010-822MR_
8.2 20ꢀ 0.430
55
51
45
41
38
0.900 0.950 1.00
0.650 0.850
LPS4010-103MR_ 10 20ꢀ
LPS4010-123MR_ 12 20ꢀ
LPS4010-153MR_ 15 20ꢀ
LPS4010-183MR_ 18 20ꢀ
0.468
0.630
0.700
0.775
0.860 0.880 0.900 0.600 0.800
0.760 0.780 0.800 0.525 0.700
0.720 0.740 0.760 0.500 0.675
0.660 0.680 0.700 0.450 0.625
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
LPS4010-223MR_ 22 20ꢀ
LPS4010-333MR_ 33 20ꢀ
LPS4010-473MR_ 47 20ꢀ
LPS4010-683MR_ 68 20ꢀ
LPS4010-104MR_ 100 20ꢀ
1.04
1.65
2.23
2.97
4.36
33
27
21
17
14
0.580 0.600 0.620 0.375 0.525
0.470 0.480 0.490 0.300 0.425
0.400 0.410 0.420 0.260 0.360
0.330 0.340 0.350 0.240 0.320
0.270 0.280 0.290 0.200 0.300
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient.This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
LPS4010-124MR_ 120 20ꢀ
LPS4010-154MR_ 150 20ꢀ
LPS4010-184MR_ 180 20ꢀ
LPS4010-224MR_ 220 20ꢀ
4.90
5.85
7.55
8.66
13
11
10
0.250 0.260 0.270 0.190 0.250
0.235 0.240 0.245 0.170 0.230
0.210 0.215 0.220 0.155 0.210
8.9 0.190 0.195 0.200 0.145 0.190
Document 1698-1 Revised 03/15/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.