5秒后页面跳转
LPC2478FBD208 PDF预览

LPC2478FBD208

更新时间: 2024-10-26 04:19:51
品牌 Logo 应用领域
恩智浦 - NXP 闪存存储微控制器和处理器外围集成电路装置以太网时钟
页数 文件大小 规格书
76页 2146K
描述
Single-chip 16-bit/32-bit micro; 512 kB flash, ethernet, CAN, LCD, USB 2.0 device/host/OTG, external memory interface

LPC2478FBD208 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFP
包装说明:LFQFP, QFP208,1.2SQ,20针数:208
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.31.00.01风险等级:1.9
Is Samacsys:N具有ADC:YES
地址总线宽度:24位大小:32
边界扫描:YESCPU系列:ARM7
最大时钟频率:25 MHzDAC 通道:YES
DMA 通道:YES外部数据总线宽度:32
格式:FIXED POINT集成缓存:NO
JESD-30 代码:S-PQFP-G208JESD-609代码:e3
长度:28 mm低功率模式:YES
湿度敏感等级:2DMA 通道数量:1
外部中断装置数量:4I/O 线路数量:160
串行 I/O 数:4端子数量:208
计时器数量:4片上数据RAM宽度:32
片上程序ROM宽度:128最高工作温度:85 °C
最低工作温度:-40 °CPWM 通道:YES
封装主体材料:PLASTIC/EPOXY封装代码:LFQFP
封装等效代码:QFP208,1.2SQ,20封装形状:SQUARE
封装形式:FLATPACK, LOW PROFILE, FINE PITCH峰值回流温度(摄氏度):260
电源:3.3 V认证状态:Not Qualified
RAM(字节):65536RAM(字数):16384
ROM(单词):32768ROM可编程性:FLASH
座面最大高度:1.6 mm速度:72 MHz
子类别:Microcontrollers最大压摆率:100 mA
最大供电电压:3.6 V最小供电电压:3 V
标称供电电压:3.3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Tin (Sn)端子形式:GULL WING
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:30宽度:28 mm
uPs/uCs/外围集成电路类型:MICROCONTROLLER, RISCBase Number Matches:1

LPC2478FBD208 数据手册

 浏览型号LPC2478FBD208的Datasheet PDF文件第2页浏览型号LPC2478FBD208的Datasheet PDF文件第3页浏览型号LPC2478FBD208的Datasheet PDF文件第4页浏览型号LPC2478FBD208的Datasheet PDF文件第5页浏览型号LPC2478FBD208的Datasheet PDF文件第6页浏览型号LPC2478FBD208的Datasheet PDF文件第7页 
LPC2478  
Single-chip 16-bit/32-bit micro; 512 kB flash, ethernet, CAN,  
LCD, USB 2.0 device/host/OTG, external memory interface  
Rev. 01 — 6 July 2007  
Preliminary data sheet  
1. General description  
NXP Semiconductors designed the LPC2478 microcontroller, powered by the  
ARM7TDMI-S core, to be a highly integrated microcontroller for a wide range of  
applications that require advanced communications and high quality graphic displays. The  
LPC2478 microcontroller has 512 kB of on-chip high-speed flash memory. This flash  
memory includes a special 128-bit wide memory interface and accelerator architecture  
that enables the CPU to execute sequential instructions from flash memory at the  
maximum 72 MHz system clock rate. This feature is available only on the LPC2000 ARM  
microcontroller family of products. The LPC2478, with real-time debug interfaces that  
include both JTAG and embedded trace, can execute both 32-bit ARM and 16-bit Thumb  
instructions.  
The LPC2478 microcontroller incorporates an LCD controller, a 10/100 Ethernet Media  
Access Controller (MAC), a USB full-speed Device/Host/OTG Controller with 4 kB of  
endpoint RAM, four UARTs, two Controller Area Network (CAN) channels, an SPI  
interface, two Synchronous Serial Ports (SSP), three I2C interfaces, and an I2S interface.  
Supporting this collection of serial communications interfaces are the following feature  
components; an on-chip 4 MHz internal oscillator, 98 kB of total RAM consisting of 64 kB  
of local SRAM, 16 kB SRAM for Ethernet, 16 kB SRAM for general purpose DMA, 2 kB of  
battery powered SRAM, and an External Memory Controller (EMC). These features make  
this device optimally suited for portable electronics and Point-of-Sale (POS) applications.  
Complementing the many serial communication controllers, versatile clocking capabilities,  
and memory features are various 32-bit timers, a 10-bit ADC, 10-bit DAC, two PWM units,  
and up to 160 fast GPIO lines. The LPC2478 connects 64 of the GPIO pins to the  
hardware based Vector Interrupt Controller (VIC) that means these external inputs can  
generate edge-triggered interrupts. All of these features make the LPC2478 device  
particularly suitable for industrial control and medical systems.  
2. Features  
„ ARM7TDMI-S processor, running at up to 72 MHz.  
„ 512 kB on-chip flash program memory with In-System Programming (ISP) and  
In-Application Programming (IAP) capabilities. Flash program memory is on the ARM  
local bus for high performance CPU access.  
„ 98 kB on-chip SRAM includes:  
‹ 64 kB of SRAM on the ARM local bus for high performance CPU access.  
‹ 16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM.  
‹ 16 kB SRAM for general purpose DMA use also accessible by the USB.  
‹ 2 kB SRAM data storage powered from the RTC power domain.  

LPC2478FBD208 替代型号

型号 品牌 替代类型 描述 数据表
LPC2478FBD208,551 NXP

类似代替

LPC2478 - Single-chip 16-bit/32-bit micro; 512 kB flash, Ethernet, CAN, LCD, USB 2.0 devic

与LPC2478FBD208相关器件

型号 品牌 获取价格 描述 数据表
LPC2478FBD208,551 NXP

获取价格

LPC2478 - Single-chip 16-bit/32-bit micro; 512 kB flash, Ethernet, CAN, LCD, USB 2.0 devic
LPC2478FBD208K NXP

获取价格

RISC Microcontroller
LPC2478FBD208-S NXP

获取价格

暂无描述
LPC2478FET208 NXP

获取价格

Single-chip 16-bit/32-bit micro; 512 kB flash, ethernet, CAN, LCD, USB 2.0 device/host/OTG
LPC25161000UHA VISHAY

获取价格

General Fixed Inductor, 1 ELEMENT, 1000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
LPC2516100UHA VISHAY

获取价格

General Fixed Inductor, 1 ELEMENT, 100 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
LPC2516150UHA VISHAY

获取价格

General Fixed Inductor, 1 ELEMENT, 150 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
LPC25161MHA VISHAY

获取价格

General Purpose Inductor, 1000uH, 2516
LPC25162200UHA VISHAY

获取价格

General Fixed Inductor, 1 ELEMENT, 2200 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
LPC2516220UHA VISHAY

获取价格

General Fixed Inductor, 1 ELEMENT, 220 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD