LED Power Supply
Product
Specifications
LP4240-XX-YZ-E Series
Switch-Mode LED Driver
Total Power
240 Watts
ANZ#: Z099e, July 31, 2006
Input Voltages
90-264 VAC
Number of Outputs Three or Four
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
Input range
Frequency
90 to 264 VAC, Full range
• Three (3) or Four (4) independent Class 2 outputs
• In compliance to EN61000-3-2, -3-3 Class D
• Low Inrush Current maximize number of hookup
• Incompliance to NEMA3, IP66 standards
• Suitable for damp or dry locations
• Suitable for wet location w/adequate connectors
• Aluminum extrusion enclosure, convection cool
• OCP, OTP and SCP w/ auto-recovery
• DIN Rail Mounting – Optional
47 to 63 Hz
Power Factor
Inrush current
Input current
Efficiency
> 0.95 at full load, 115VAC
5.0 Amps maximum at 115VAC, cold start, 25º C
3.0Amps maximum at 115VAC
85% typical at 230VAC and maximum load
47CFR, Part 2, Part 15 and Cispr PUB, 22 Class A
EMI filtering
Maximum power 240W total
Line Regulation 1%
Load Regulation ±3%
Ripple Noise
3% typ.
Leakage Current 2mA @ 110VAC, 4mA @ 230VAC
ENVIRONMENTAL
Operating temperature:
(De-rating : 2.5% per ºC from 50ºC~70ºC )
Storage temperature:
Hold up time
Protection
Half cycle minimum at 120 VAC and 80% of rated
load
Over-voltage, Over-current, Over-temp. and Short
circuit protection
-30 to 70 º C
-40 to 85 º C
Humidity (Non-Condensing): 5% to 95%
SAFETY
UL/cUL
CE
Cooling:
Vibration Frequency:
MTBF:
EMC :
Convection
5 to 50 Hz
>100,000 Hours at full load and 25ºC
ambient conditions (MIL-217F)
Compliant to 47CFR, Part 2, Part15 and
Cispr PUB, 22 Class B
UL48, Class 2
Certified
MODEL INFORMATION
DC Output
Channel 2 Channel 3
Output per
Total Output
(Watts)
Model #
Channel
(Watts)
Channel 1
(VDC/Amp)
12VDC
Channel 4
(VDC/Amp)
12VDC
0 ~ 5 Amp
15VDC
0 ~ 4 Amp
24VDC
0 ~ 2.5 Amp
---
(VDC/Amp)
12VDC
(VDC/Amp)
12VDC
LP4240-12-YZ-E
LP4240-15-YZ-E
LP4240-24-YZ-E
LP3240-24-YZ-E
60
60
60
80
240
240
240
240
0 ~ 5 Amp
15VDC
0 ~ 4 Amp
24VDC
0 ~ 2.5 Amp
24VDC
0 ~ 3.3 Amp
0 ~ 5 Amp
15VDC
0 ~ 5 Amp
15VDC
0 ~ 4 Amp
24VDC
0 ~ 4 Amp
24VDC
0 ~ 2.5 Amp
24VDC
0 ~ 2.5 Amp
24VDC
0 ~ 3.3 Amp
0 ~ 3.3 Amp
---
MECHANICAL DRAWING
Model Information – Single DC output
LP4240-XX-YZ-E and LP3240-XX-YZ-E
XX – DC outputs
Y – AC input connector (J – Junction Box)
Z – DC output connector (G – Gland, T – Terminal Block or J – Junction Box)
E – Aluminum extrusion enclosure length (Refer to mechanical drawing)
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz099e