Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors
Stable ESR, Long Life, Snap-In
Type LP radial snap-in aluminum electrolytic capacitors
are small in size and are rated for low voltage applica-
tions. Their durable construction guarantees a long life
while operating up to 105 ºC with a stable ESR. These
features make the Type LP ideal for use in switch-mode
power supplies.
Highlights
•
•
•
High Reliability
105 ºC
22 to 35 mm diameter with 10 mm lead spacing
Specifications
Capacitance Range:
Voltage Range:
Capacitance tolerance:
Operating Temperature Range:
Dissipation Factor:
100 to 47,000 µF
16 to 250 Vdc
±20%
–40 ºC to +105 ºC
DF at 120 Hz, +25 ºC
Vdc
16
30
25 - 35
25
50 - 63
20
100- 250
15
DF %
For values that are >1000 µF, the DF (%) increases
2% for every additional 1000 µF
DC Leakage Test:
I = .02CV
C = capacitance in µF
V = rated voltage
I = leakage current in µA
Voltage/Frequency Ripple Multipliers:
Temperature Ripple Multipliers:
Rated
Vdc
Ripple Multipliers
60 Hz 100 Hz 300 Hz 1000 Hz 10 kHz 100 kHz
10 to 50 0.90 1.00
63 to 100 0.85 1.00
160 to 250 0.80 1.00
1.03
1.07
1.15
1.05
1.13
1.25
1.10
1.19
1.35
1.10
1.20
1.40
Temperature
+85 ºC
Ripple Multiplier
1.65
2.25
2.55
+65 ºC
+45 ºC
The maximum ripple current at 105 ºC and 120 Hz are
the Ratings Table. Adjust to other temperature and fre-
quencies using the tables here.
Load Life Test:
1,000 h @ full load at +105 ºC per EIA IS-749
∆ Capacitance ±20%
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
ESR 200% of limit
DCL 100% of limit
500 h @ 105 ºC, capacitance, ≤200% ESR and
DC ±20%, initial requirements
10 to 55 Hz, 0.06” and 10 g max, 2 h in each
plane
Shelf Life:
Vibration:
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com