5秒后页面跳转
LMV1024 PDF预览

LMV1024

更新时间: 2024-11-18 04:19:59
品牌 Logo 应用领域
美国国家半导体 - NSC 放大器光电二极管
页数 文件大小 规格书
17页 1141K
描述
PDM Output with Pre-Amplifier for Electret Microphones

LMV1024 数据手册

 浏览型号LMV1024的Datasheet PDF文件第2页浏览型号LMV1024的Datasheet PDF文件第3页浏览型号LMV1024的Datasheet PDF文件第4页浏览型号LMV1024的Datasheet PDF文件第5页浏览型号LMV1024的Datasheet PDF文件第6页浏览型号LMV1024的Datasheet PDF文件第7页 
November 2005  
LMV1024/LMV1026 (Stereo)  
PDM Output with Pre-Amplifier for Electret Microphones  
General Description  
Features  
National’s LMV1024 and LMV1026 stereo amplifiers are  
solutions for the new generation of voice enrichment capa-  
bilities. National has integrated sigma delta modulation and  
analog cores to improve the voice quality and the perfor-  
mance and to support designer’s choices.  
(Typical VDD = 1.8V, CLOCK = 1.2 MHz, fINPUT = 1 kHz,  
VINPUT = 18 mVPP, unless otherwise specified)  
n Enhanced high-performance, full PDM output from the  
element  
n Stereo chipset and array routing  
Each 20 kHz preamplifier drives a Pulse Density Modulated  
(PDM) signal at an over sampled 60 bit stream, offering  
versatility. These solutions provide immediate conversion to  
high performance audio spectrum, thus completing a high  
quality audio system. The LMV1024 and LMV1026 operate  
from 1.6V to 3V.  
n SNR A-weighted  
n Digital A-weighted noise floor  
n Supply current  
n Clock frequency  
n Total harmonic distortion  
n Power supply rejection ratio  
n Adhesion technology 1 kg  
n Highly integrated stereo or mono signaling  
n Maximized system performance  
n Reduced components and layout  
n RF (buzz noise) managed with 4 wire signaling  
n Thinnest 0.35 mm micro SMD packaging  
59 dB  
−89 dBFS  
518 µA  
400 kHz to 2.4 MHz  
0.03%  
100 dB  
National’s new adjustable clock frequency technology is de-  
signed for stereo, performance and ease of use. The stereo  
function is either a rising or falling edge clock command. The  
high drive, robust PDM signal directly from an ECM (Electret  
Condenser Microphone), upgrades existing lower quality,  
low-level signal constraints.  
>
These advanced mixed signal preamplifiers cleanly, accu-  
rately and creatively eliminate older, poorer quality systems,  
which restricted performance and versatility. The 4-wire  
PDM signaling reduces RF noise and simplifies layout. Us-  
ing National’s PDM solutions is the choice for higher quality  
mono or stereo and multi-array applications.  
Applications  
n Digital output audio subsystems and stereo arrays  
n Electret condenser microphones with all digital output  
n Portable communications and small form factor  
n Digital audio computing or voice security  
n Automotive or array systems  
National’s 518uA circuits deliver stereo portability with audio  
quality bandwidth. These solutions enable rapid system  
evaluation and enhance consumer satisfaction. National pro-  
vides the LMV1024 and LMV1026 in 6-bump micro SMD  
packages with 1 kg adhesion properties.  
n Headphone and Headset accessories  
Typical Application  
20133475  
For a stereo application, see STEREO OPERATION in the Application Section.  
© 2005 National Semiconductor Corporation  
DS201334  
www.national.com  

与LMV1024相关器件

型号 品牌 获取价格 描述 数据表
LMV1024_09 NSC

获取价格

PDM Output with Pre-Amplifier for Electret Microphones
LMV1024UR NSC

获取价格

PDM Output with Pre-Amplifier for Electret Microphones
LMV1024URX NSC

获取价格

PDM Output with Pre-Amplifier for Electret Microphones
LMV1026 NSC

获取价格

PDM Output with Pre-Amplifier for Electret Microphones
LMV1026UR NSC

获取价格

PDM Output with Pre-Amplifier for Electret Microphones
LMV1026URX NSC

获取价格

PDM Output with Pre-Amplifier for Electret Microphones
LMV102M5 NSC

获取价格

Fixed-Gain Amplifiers
LMV102M5X NSC

获取价格

Fixed-Gain Amplifiers
LMV102M7 NSC

获取价格

Fixed-Gain Amplifiers
LMV102M7X NSC

获取价格

Fixed-Gain Amplifiers