OBSOLETE
July 20, 2009
LMV1024/LMV1026 (Stereo)
PDM Output with Pre-Amplifier for Electret Microphones
General Description
Features
National’s LMV1024 and LMV1026 stereo amplifiers are so-
lutions for the new generation of voice enrichment capabili-
ties. National has integrated sigma delta modulation and
analog cores to improve the voice quality and the perfor-
mance and to support designer’s choices.
(Typical VDD = 1.8V, CLOCK = 1.2 MHz, fINPUT = 1 kHz,
VINPUT = 18 mVPP, unless otherwise specified)
Enhanced high-performance, full PDM output from the el-
ement
■
Stereo chipset and array routing
SNR A-weighted
Digital A-weighted noise floor
Supply current
Clock frequency
Total harmonic distortion
Power supply rejection ratio
Adhesion technology >1 kg
Highly integrated stereo or mono signaling
Maximized system performance
Reduced components and layout
RF (buzz noise) managed with 4 wire signaling
Thinnest 0.35 mm micro SMD packaging
■
Each 20 kHz preamplifier drives a Pulse Density Modulated
(PDM) signal at an over sampled 60 bit stream, offering ver-
satility. These solutions provide immediate conversion to high
performance audio spectrum, thus completing a high quality
audio system. The LMV1024 and LMV1026 operate from
1.6V to 3V.
59 dB
−89 dBFS
518 µA
400 kHz to 2.4 MHz
0.03%
■
■
■
■
■
■
■
■
■
■
■
■
100 dB
National’s new adjustable clock frequency technology is de-
signed for stereo, performance and ease of use. The stereo
function is either a rising or falling edge clock command. The
high drive, robust PDM signal directly from an ECM (Electret
Condenser Microphone), upgrades existing lower quality,
low-level signal constraints.
These advanced mixed signal preamplifiers cleanly, accu-
rately and creatively eliminate older, poorer quality systems,
which restricted performance and versatility. The 4-wire PDM
signaling reduces RF noise and simplifies layout. Using
National’s PDM solutions is the choice for higher quality mono
or stereo and multi-array applications.
Applications
Digital output audio subsystems and stereo arrays
■
■
■
■
■
■
Electret condenser microphones with all digital output
Portable communications and small form factor
National’s 518uA circuits deliver stereo portability with audio
quality bandwidth. These solutions enable rapid system eval-
uation and enhance consumer satisfaction. National provides
the LMV1024 and LMV1026 in 6-bump micro SMD packages
with 1 kg adhesion properties.
Digital audio computing or voice security
Automotive or array systems
Headphone and Headset accessories
Typical Application
20133475
For a stereo application, see STEREO OPERATION in the Application Section.
© 2009 National Semiconductor Corporation
201334
www.national.com
201334 Version 3 Revision 4 Print Date/Time: 2009/07/20 17:12:49