LMH6639
www.ti.com
SNOS989G –JANUARY 2002–REVISED MARCH 2013
LMH6639 190MHz Rail-to-Rail Output Amplifier with Disable
Check for Samples: LMH6639
1
FEATURES
DESCRIPTION
The LMH6639 is a voltage feedback operational
amplifier with a rail-to-rail output drive capability of
110mA. Employing TI’s patented VIP10 process, the
LMH6639 delivers a bandwidth of 190MHz at a
current consumption of only 3.6mA. An input common
mode voltage range extending to 0.2V below the V−
and to within 1V of V+, makes the LMH6639 a true
single supply op-amp. The output voltage range
extends to within 30mV of either supply rail providing
the user with a dynamic range that is especially
desirable in low voltage applications.
2
•
•
•
•
•
•
•
•
•
•
•
•
(VS = 5V, Typical Values Unless Specified)
Supply Current (No Load) 3.6mA
Supply Current (Off Mode) 400μA
Output Resistance (Closed Loop 1MHz) 0.186Ω
−3dB BW (AV = 1) 190MHz
Settling Time 33nsec
Input Common Mode Voltage −0.2V to 4V
Output Voltage Swing 40mV from Rails
Linear Output Current 110mA
The LMH6639 offers a slew rate of 172V/μs resulting
in a full power bandwidth of approximately 28MHz.
The LMH6639 also offers protection for the input
transistors by using two anti-parallel diodes and a
series resistor connected across the inputs. The TON
value of 83nsec combined with a settling time of
33nsec makes this device ideally suited for
multiplexing applications (see application note for
details). Careful attention has been paid to ensure
device stability under all operating voltages and
modes. The result is a very well behaved frequency
response characteristic for any gain setting including
+1, and excellent specifications for driving video
cables including harmonic distortion of −60dBc,
differential gain of 0.12% and differential phase of
0.045°
Total Harmonic Distortion −60dBc
Fully Characterized for 3V, 5V and ±5V
No Output Phase Reversal with CMVR
Exceeded
•
•
•
•
Excellent Overdrive Recovery
Off Isolation 1MHz −70dB
Differential Gain 0.12%
Differential Phase 0.045°
APPLICATIONS
•
•
•
•
•
Active Filters
CD/DVD ROM
ADC Buffer Amplifier
Portable Video
Current Sense Buffer
100n
5V
+
+
-
V
OUT
INPUT
1k
75W
SD
-
V
75W
75W
V
REF
1k
10n
SHUTDOWN INPUT
Figure 1. Typical Single Supply Schematic
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2013, Texas Instruments Incorporated