5秒后页面跳转
LMH6639MF/NOPB PDF预览

LMH6639MF/NOPB

更新时间: 2024-11-24 11:12:59
品牌 Logo 应用领域
德州仪器 - TI 放大器PC光电二极管
页数 文件大小 规格书
31页 1639K
描述
具有禁能功能的 190MHz 轨到轨输出放大器 | DBV | 6 | -40 to 85

LMH6639MF/NOPB 技术参数

是否无铅:不含铅是否Rohs认证:符合
生命周期:Active零件包装代码:SOT-23
包装说明:SOT-23, 6 PIN针数:6
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:1 week
风险等级:0.92Samacsys Confidence:3
Samacsys Status:ReleasedSamacsys PartID:157737
Samacsys Pin Count:6Samacsys Part Category:Integrated Circuit
Samacsys Package Category:SOT23 (6-Pin)Samacsys Footprint Name:LMH6639MF/NOPB
Samacsys Released Date:2019-06-27 15:01:50Is Samacsys:N
放大器类型:OPERATIONAL AMPLIFIER架构:VOLTAGE-FEEDBACK
最大平均偏置电流 (IIB):3.25 µA标称带宽 (3dB):63 MHz
25C 时的最大偏置电流 (IIB):2.6 µA最小共模抑制比:72 dB
标称共模抑制比:95 dB频率补偿:YES
最大输入失调电流 (IIO):0.8 µA最大输入失调电压:5000 µV
JESD-30 代码:R-PDSO-G6JESD-609代码:e3
长度:2.92 mm低-偏置:NO
低-失调:NO微功率:NO
湿度敏感等级:1负供电电压上限:-6.3 V
标称负供电电压 (Vsup):-5 V功能数量:1
端子数量:6最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:LSSOP封装等效代码:TSOP6,.11,37
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
包装方法:TR峰值回流温度(摄氏度):260
功率:NO电源:3/5/+-5 V
可编程功率:NO认证状态:Not Qualified
座面最大高度:1.22 mm最小摆率:120 V/us
标称压摆率:172 V/us子类别:Operational Amplifier
最大压摆率:5.8 mA供电电压上限:6.3 V
标称供电电压 (Vsup):5 V表面贴装:YES
技术:BIPOLAR温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:0.95 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED标称均一增益带宽:86000 kHz
最小电压增益:5011.872宽带:YES
宽度:1.6 mmBase Number Matches:1

LMH6639MF/NOPB 数据手册

 浏览型号LMH6639MF/NOPB的Datasheet PDF文件第2页浏览型号LMH6639MF/NOPB的Datasheet PDF文件第3页浏览型号LMH6639MF/NOPB的Datasheet PDF文件第4页浏览型号LMH6639MF/NOPB的Datasheet PDF文件第5页浏览型号LMH6639MF/NOPB的Datasheet PDF文件第6页浏览型号LMH6639MF/NOPB的Datasheet PDF文件第7页 
LMH6639  
www.ti.com  
SNOS989G JANUARY 2002REVISED MARCH 2013  
LMH6639 190MHz Rail-to-Rail Output Amplifier with Disable  
Check for Samples: LMH6639  
1
FEATURES  
DESCRIPTION  
The LMH6639 is a voltage feedback operational  
amplifier with a rail-to-rail output drive capability of  
110mA. Employing TI’s patented VIP10 process, the  
LMH6639 delivers a bandwidth of 190MHz at a  
current consumption of only 3.6mA. An input common  
mode voltage range extending to 0.2V below the V−  
and to within 1V of V+, makes the LMH6639 a true  
single supply op-amp. The output voltage range  
extends to within 30mV of either supply rail providing  
the user with a dynamic range that is especially  
desirable in low voltage applications.  
2
(VS = 5V, Typical Values Unless Specified)  
Supply Current (No Load) 3.6mA  
Supply Current (Off Mode) 400μA  
Output Resistance (Closed Loop 1MHz) 0.186Ω  
3dB BW (AV = 1) 190MHz  
Settling Time 33nsec  
Input Common Mode Voltage 0.2V to 4V  
Output Voltage Swing 40mV from Rails  
Linear Output Current 110mA  
The LMH6639 offers a slew rate of 172V/μs resulting  
in a full power bandwidth of approximately 28MHz.  
The LMH6639 also offers protection for the input  
transistors by using two anti-parallel diodes and a  
series resistor connected across the inputs. The TON  
value of 83nsec combined with a settling time of  
33nsec makes this device ideally suited for  
multiplexing applications (see application note for  
details). Careful attention has been paid to ensure  
device stability under all operating voltages and  
modes. The result is a very well behaved frequency  
response characteristic for any gain setting including  
+1, and excellent specifications for driving video  
cables including harmonic distortion of 60dBc,  
differential gain of 0.12% and differential phase of  
0.045°  
Total Harmonic Distortion 60dBc  
Fully Characterized for 3V, 5V and ±5V  
No Output Phase Reversal with CMVR  
Exceeded  
Excellent Overdrive Recovery  
Off Isolation 1MHz 70dB  
Differential Gain 0.12%  
Differential Phase 0.045°  
APPLICATIONS  
Active Filters  
CD/DVD ROM  
ADC Buffer Amplifier  
Portable Video  
Current Sense Buffer  
100n  
5V  
+
+
-
V
OUT  
INPUT  
1k  
75W  
SD  
-
V
75W  
75W  
V
REF  
1k  
10n  
SHUTDOWN INPUT  
Figure 1. Typical Single Supply Schematic  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
All trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2002–2013, Texas Instruments Incorporated  

LMH6639MF/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
LMH6639MF TI

完全替代

具有禁能功能的 190MHz 轨到轨输出放大器 | DBV | 6 | -40 to 85
OPA890IDBVT TI

类似代替

具有禁用功能的低功耗宽带电压反馈运算放大器 | DBV | 6 | -40 to 85
OPA890IDBVR TI

类似代替

具有禁用功能的低功耗宽带电压反馈运算放大器 | DBV | 6 | -40 to 85

与LMH6639MF/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LMH6639MFX NSC

获取价格

190MHz Rail-to-Rail Output Amplifier with Disable
LMH6639MFX/NOPB TI

获取价格

具有禁能功能的 190MHz 轨到轨输出放大器 | DBV | 6 | -40 to 85
LMH6639-MIL TI

获取价格

具有禁能功能的 190MHz 轨到轨输出放大器
LMH6640 NSC

获取价格

TFT-LCD Single, 16V Rail-to-Rail High Output Operational Amplifier
LMH6640MF NSC

获取价格

IC 1 CHANNEL, VIDEO AMPLIFIER, PDSO5, SOT-23, 5 PIN, Audio/Video Amplifier
LMH6640MF TI

获取价格

1 CHANNEL, VIDEO AMPLIFIER, PDSO5, SOT-23, 5 PIN
LMH6640MF/NOPB NSC

获取价格

IC 1 CHANNEL, VIDEO AMPLIFIER, PDSO5, SOT-23, 5 PIN, Audio/Video Amplifier
LMH6640MFX NSC

获取价格

IC 1 CHANNEL, VIDEO AMPLIFIER, PDSO5, SOT-23, 5 PIN, Audio/Video Amplifier
LMH6640MFX/NOPB NSC

获取价格

IC 1 CHANNEL, VIDEO AMPLIFIER, PDSO5, SOT-23, 5 PIN, Audio/Video Amplifier
LMH6642 NSC

获取价格

3V, Low Power, 130MHz, 75mA Rail-to-Rail Output Amplifiers