5秒后页面跳转
LMH6618MKE/NOPB PDF预览

LMH6618MKE/NOPB

更新时间: 2024-11-13 11:11:11
品牌 Logo 应用领域
德州仪器 - TI 放大器光电二极管运算放大器
页数 文件大小 规格书
42页 2699K
描述
单路 130 MHz、1.25 mA RRIO 运算放大器 | DDC | 6 | -40 to 125

LMH6618MKE/NOPB 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOT-23
包装说明:TSSOP, TSOP6,.11,37针数:6
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:6 weeks
风险等级:1.05放大器类型:OPERATIONAL AMPLIFIER
架构:VOLTAGE-FEEDBACK最大平均偏置电流 (IIB):2.4 µA
标称带宽 (3dB):13 MHz25C 时的最大偏置电流 (IIB):2.6 µA
最小共模抑制比:78 dB标称共模抑制比:96 dB
频率补偿:YES最大输入失调电流 (IIO):0.27 µA
最大输入失调电压:750 µVJESD-30 代码:R-PDSO-G6
JESD-609代码:e3长度:2.9 mm
低-偏置:NO低-失调:NO
微功率:NO湿度敏感等级:1
负供电电压上限:-5.5 V标称负供电电压 (Vsup):-5 V
功能数量:1端子数量:6
最高工作温度:125 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSOP6,.11,37封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH包装方法:TR
峰值回流温度(摄氏度):260功率:NO
电源:+-1.35/+-5.5/2.7/11 V可编程功率:NO
认证状态:Not Qualified座面最大高度:1.1 mm
最小摆率:36 V/us标称压摆率:57 V/us
子类别:Operational Amplifier最大压摆率:1.6 mA
供电电压上限:5.5 V标称供电电压 (Vsup):5 V
表面贴装:YES技术:BIPOLAR
温度等级:AUTOMOTIVE端子面层:Matte Tin (Sn)
端子形式:GULL WING端子节距:0.95 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
标称均一增益带宽:71000 kHz最小电压增益:6309.573
宽带:YES宽度:1.6 mm

LMH6618MKE/NOPB 数据手册

 浏览型号LMH6618MKE/NOPB的Datasheet PDF文件第2页浏览型号LMH6618MKE/NOPB的Datasheet PDF文件第3页浏览型号LMH6618MKE/NOPB的Datasheet PDF文件第4页浏览型号LMH6618MKE/NOPB的Datasheet PDF文件第5页浏览型号LMH6618MKE/NOPB的Datasheet PDF文件第6页浏览型号LMH6618MKE/NOPB的Datasheet PDF文件第7页 
LMH6618, LMH6619  
www.ti.com  
SNOSAV7E AUGUST 2007REVISED OCTOBER 2012  
LMH6618 Single/LMH6619 Dual 130 MHz, 1.25 mA RRIO Operational Amplifiers  
Check for Samples: LMH6618, LMH6619  
1
FEATURES  
Industrial Temperature Grade 40°C to +125°C  
Rail-to-Rail Input and Output  
23  
VS = 5V, RL = 1 k, TA = 25°C and AV = +1,  
Unless Otherwise Specified.  
APPLICATIONS  
Operating Voltage Range 2.7V to 11V  
Supply Current per Channel 1.25 mA  
Small Signal Bandwidth 130 MHz  
Input Offset Voltage (Limit at 25°C) ±0.75 mV  
Slew Rate 55 V/µs  
ADC Driver  
DAC Buffer  
Active Filters  
High Speed Sensor Amplifier  
Current Sense Amplifier  
Portable Video  
Settling Time to 0.1% 90 ns  
Settling Time to 0.01% 120 ns  
STB, TV Video Amplifier  
SFDR (f = 100 kHz, AV = +1, VOUT = 2 VPP) 100  
dBc  
0.1 dB Bandwidth (AV = +2) 15 MHz  
Low Voltage Noise 10 nV/Hz  
DESCRIPTION  
The LMH6618 (single, with shutdown) and LMH6619 (dual) are 130 MHz rail-to-rail input and output amplifiers  
designed for ease of use in a wide range of applications requiring high speed, low supply current, low noise, and  
the ability to drive complex ADC and video loads. The operating voltage range extends from 2.7V to 11V and the  
supply current is typically 1.25 mA per channel at 5V. The LMH6618 and LMH6619 are members of the  
PowerWise® family and have an exceptional power-to-performance ratio.  
The amplifier’s voltage feedback design topology provides balanced inputs and high open loop gain for ease of  
use and accuracy in applications such as active filter design. Offset voltage is typically 0.1 mV and settling time  
to 0.01% is 120 ns which combined with an 100 dBc SFDR at 100 kHz makes the part suitable for use as an  
input buffer for popular 8-bit, 10-bit, 12-bit and 14-bit mega-sample ADCs.  
The input common mode range extends 200 mV beyond the supply rails. On a single 5V supply with a ground  
terminated 150load the output swings to within 37 mV of the ground rail, while a mid-rail terminated 1 kload  
will swing to 77 mV of either rail, providing true single supply operation and maximum signal dynamic range on  
low power rails. The amplifier output will source and sink 35 mA and drive up to 30 pF loads without the need for  
external compensation.  
The LMH6618 has an active low disable pin which reduces the supply current to 72 µA and is offered in the  
space saving 6-Pin SOT package. The LMH6619 is offered in the 8-Pin SOIC package. The LMH6618 and  
LMH6619 are available with a 40°C to +125°C extended industrial temperature grade.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
3
PowerWise, WEBENCH are registered trademarks of Texas Instruments.  
All other trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2007–2012, Texas Instruments Incorporated  

LMH6618MKE/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
LMH6618MK/NOPB TI

类似代替

单路 130 MHz、1.25 mA RRIO 运算放大器 | DDC | 6 | -40
LMH6618MKX/NOPB TI

类似代替

单路 130 MHz、1.25 mA RRIO 运算放大器 | DDC | 6 | -40

与LMH6618MKE/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LMH6618MKX NSC

获取价格

130 MHz, 1.25 mA Rail-to-Rail Input and Output Operational Amplifier with Shutdown
LMH6618MKX/NOPB TI

获取价格

单路 130 MHz、1.25 mA RRIO 运算放大器 | DDC | 6 | -40
LMH6619 TI

获取价格

双路 130 MHz、1.25 mA RRIO 运算放大器
LMH6619MA NSC

获取价格

PowerWise㈢ 130 MHz, 1.25 mA RRIO Operational
LMH6619MA/NOPB TI

获取价格

双路 130 MHz、1.25 mA RRIO 运算放大器 | D | 8 | -40 t
LMH6619MAE NSC

获取价格

PowerWise㈢ 130 MHz, 1.25 mA RRIO Operational
LMH6619MAE/NOPB TI

获取价格

双路 130 MHz、1.25 mA RRIO 运算放大器 | D | 8 | -40 t
LMH6619MAX NSC

获取价格

PowerWise㈢ 130 MHz, 1.25 mA RRIO Operational
LMH6619MAX/NOPB TI

获取价格

双路 130 MHz、1.25 mA RRIO 运算放大器 | D | 8 | -40 t
LMH6619-Q1 TI

获取价格

汽车双路 130MHz、1.25mA RRIO 运算放大器