LMH6619Q
www.ti.com
SNOSC78A –JUNE 2012–REVISED NOVEMBER 2012
LMH6619Q 130 MHz, 1.25 mA RRIO Operational Amplifier
Check for Samples: LMH6619Q
1
FEATURES
•
•
AEC-Q100 grade 2 qualified −40°C to +105°C
Manufactured on an automotive grade flow
23
•
VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1,
unless otherwise specified.
APPLICATIONS
•
Operating voltage range 2.7V to 11V
Supply current per channel 1.25 mA
Small signal bandwidth 130 MHz
Input offset voltage (limit at 25°C) ±0.75 mV
Slew rate 55 V/µs
•
•
•
•
•
•
•
•
ADC driver
•
•
•
•
•
•
•
DAC buffer
Active filters
High speed sensor amplifier
Current sense amplifier
Portable video
Settling time to 0.1% 90 ns
Settling time to 0.01% 120 ns
STB, TV video amplifier
Automotive
SFDR (f = 100 kHz, AV = +1, VOUT = 2 VPP) 100
dBc
•
•
•
0.1 dB bandwidth (AV = +2) 15 MHz
Low voltage noise 10 nV/√Hz
Rail-to-Rail input and output
DESCRIPTION
The LMH6619Q (dual) is a 130 MHz rail-to-rail input and output amplifier designed for ease of use in a wide
range of applications requiring high speed, low supply current, low noise, and the ability to drive complex ADC
and video loads. The operating voltage range extends from 2.7V to 11V and the supply current is typically 1.25
mA per channel at 5V. The LMH6619Q is a member of the PowerWise® family and have an exceptional power-
to-performance ratio.
The amplifier’s voltage feedback design topology provides balanced inputs and high open loop gain for ease of
use and accuracy in applications such as active filter design. Offset voltage is typically 0.1 mV and settling time
to 0.01% is 120 ns which combined with an 100 dBc SFDR at 100 kHz makes the part suitable for use as an
input buffer for popular 8-bit, 10-bit, 12-bit and 14-bit mega-sample ADCs.
The input common mode range extends 200 mV beyond the supply rails. On a single 5V supply with a ground
terminated 150Ω load the output swings to within 37 mV of the ground rail, while a mid-rail terminated 1 kΩ load
will swing to 77 mV of either rail, providing true single supply operation and maximum signal dynamic range on
low power rails. The amplifier output will source and sink 35 mA and drive up to 30 pF loads without the need for
external compensation.
The LMH6619Q is offered in the 8-Pin SOIC package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PowerWise, WEBENCH are registered trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2012, Texas Instruments Incorporated