LMH6611, LMH6612
www.ti.com
SNOSB00K –NOVEMBER 2007–REVISED OCTOBER 2013
LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers
Check for Samples: LMH6611, LMH6612
1
FEATURES
DESCRIPTION
The LMH6611 (single, with shutdown) and LMH6612
23
•
VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1,
(dual) are 345 MHz rail-to-rail output amplifiers
consuming just 3.2 mA of quiescent current per
channel and designed to deliver high performance in
power conscious single supply systems. The
LMH6611 and LMH6612 have precision trimmed
input offset voltages with low noise and low distortion
performance as required for high accuracy video, test
and measurement, and communication applications.
The LMH6611 and LMH6612 are members of the
PowerWise family and have an exceptional power-to-
performance ratio.
Unless Otherwise Specified.
•
Operating Voltage Range 2.7V to 11V
Supply Current Per Channel 3.2 mA
Small Signal Bandwidth 345 MHz
Open Loop Gain 103 dB
•
•
•
•
•
•
•
•
•
Input Offset Voltage (Limit at 25°C) ±1.5 mV
Slew Rate 460 V/µs
0.1 dB Bandwidth 45 MHz
Settling Time to 0.1% 67 ns
With a trimmed input offset voltage of 0.022 mV and
a high open loop gain of 103 dB the LMH6611 and
LMH6612 meet the requirements of DC sensitive high
speed applications such as low pass filtering in
Settling Time to 0.01% 100 ns
SFDR (f = 100 kHz, AV = 2, VOUT = 2 VPP) 102
dBc
baseband
I
and
Q
radio channels. These
•
•
•
•
•
Low Voltage Noise 10 nV/√Hz
Output current ±100 mA
CMVR −0.2V to 3.8V
specifications combined with a 0.01% settling time of
100 ns, a low noise of 10 nV/√Hz and better than 102
dBc SFDR at 100 kHz make these amplifiers
particularly suited to driving 10, 12 and 14-bit high
speed ADCs. The 45 MHz 0.1 dB bandwidth (AV = 2)
driving 2 VPP into 150Ω allows the amplifiers to be
used as output drivers in 1080i and 720p HDTV
applications.
Rail-to-Rail Output
−40°C to +125°C Temperature Range
APPLICATIONS
•
•
•
•
•
•
•
•
ADC Driver
The input common mode range extends from 200 mV
below the negative supply rail up to 1.2V from the
positive rail. On a single 5V supply with a ground
terminated 150Ω load the output swings to within 49
mV of the ground, while a mid-rail terminated 1 kΩ
load will swing to 77 mV of either rail.
DAC Buffer
Active Filters
High Speed Sensor Amplifier
Current Sense Amplifier
1080i and 720p Analog Video Amplifier
STB, TV Video Amplifier
Video Switching and Muxing
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
WEBENCH is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated