December 18, 2007
LMH6611/LMH6612
PowerWise® Single Supply 345 MHz Rail-to-Rail Output
Amplifiers
General Description
Features
The LMH6611 (single, with shutdown) and LMH6612 (dual)
are 345 MHz rail-to-rail output amplifiers consuming just 3.2
mA of quiescent current per channel and designed to deliver
high performance in power conscious single supply systems.
The LMH6611 and LMH6612 have precision trimmed input
offset voltages with low noise and low distortion performance
as required for high accuracy video, test and measurement,
and communication applications. The LMH6611 and
LMH6612 are members of the PowerWise family and have an
exceptional power-to-performance ratio.
VS = 5V, RL = 1 kΩ, TA = 25°C and AV = +1, unless otherwise
specified.
Operating voltage range
Supply current per channel
Small signal bandwidth
Open loop gain
Input offset voltage
Slew rate
2.7V to 11V
3.2 mA
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
345 MHz
103 dB
0.022 mV
460 V/µs
45 MHz
0.1 dB bandwidth
Settling time to 0.1%
Settling time to 0.01%
SFDR (f = 100 kHz, AV = 2, VOUT = 2 VPP
Low voltage noise
Output current
CMVR
67 ns
100 ns
With a trimmed input offset voltage of 0.022 mV and a high
open loop gain of 103 dB the LMH6611 and LMH6612 meet
the requirements of DC sensitive high speed applications
such as low pass filtering in baseband I and Q radio channels.
These specifications combined with a 0.01% settling time of
)
102 dBc
10 nV/√Hz
±100 mA
−0.2V to 3.8V
100 ns, a low noise of 10 nV/
and better than 102 dBc
SFDR at 100 kHz make these amplifiers particularly suited to
driving 10, 12 and 14-bit high speed ADCs. The 45 MHz 0.1
dB bandwidth (AV = 2) driving 2 VPP into 150Ω allows the am-
plifiers to be used as output drivers in 1080i and 720p HDTV
applications.
Rail-to-Rail output
−40°C to +125°C temperature range
Applications
ADC driver
■
■
■
■
■
■
■
■
The input common mode range extends from 200 mV below
the negative supply rail up to 1.2V from the positive rail. On a
single 5V supply with a ground terminated 150Ω load the out-
put swings to within 55 mV of the ground, while a mid-rail
terminated 1 kΩ load will swing to 77 mV of either rail.
The amplifiers will operate on a 2.7V to 11V single supply or
±1.35V to ±5.5V split supply. The LMH6611 single is available
in 6-Pin TSOT23 and has an independent active low disable
pin which reduces the supply current to 120 µA. The
LMH6612 is available in 8-Pin SOIC. Both the LMH6611 and
LMH6612 are available in −40°C to +125°C extended indus-
trial temperature grade.
DAC buffer
Active filters
High speed sensor amplifier
Current sense amplifier
1080i and 720p analog video amplifier
STB, TV video amplifier
Video switching and muxing
Typical Application
30033629
PowerWise® is a registered trademark of National Semiconductor.
WEBENCH® is a registered trademark of National Semiconductor Corporation.
© 2007 National Semiconductor Corporation
300336
www.national.com