LME49713
www.ti.com
SNAS386F –SEPTEMBER 2007–REVISED MARCH 2013
LME49713 High Performance, High Fidelity Current Feedback
Audio Operational Amplifier
Check for Samples: LME49713
1
FEATURES
DESCRIPTION
2
•
•
•
•
•
Easily Drives 150Ω Loads
The LME49713 is an ultra-low distortion, low noise,
ultra high slew rate current feedback operational
amplifier optimized and fully specified for high
performance, high fidelity applications. Combining
advanced leading-edge process technology with
state-of-the-art circuit design, the LME49713 current
feedback operational amplifier delivers superior signal
amplification for outstanding performance. Operating
on a wide supply range of ±5V to ±18V, the
LME49713 combines extremely low voltage noise
density (1.9nV/√Hz) with very low THD+N (0.00036%)
to easily satisfy the most demanding applications. To
ensure that the most challenging loads are driven
without compromise, the LME49713 has a high slew
rate of ±1900V/μs and an output current capability of
±100mA. Further, dynamic range is maximized by an
output stage that drives 150Ω loads to within 2.9V of
either power supply voltage.
Optimized for Superior Audio Signal Fidelity
Output Short Circuit Protection
100dB (Typ) PSRR and 88dB (Typ) CMRR
SOIC High-Performance and TO-99 Packages
APPLICATIONS
•
•
•
•
•
•
Ultra High Quality Audio Amplification
High-Fidelity Preamplifiers
High-Fidelity Multimedia
State-of-the-Art Phono Pre Amps
High-Performance Professional Audio
High-Fidelity Equalization and Crossover
Networks
•
•
•
High-Performance Line Drivers
High-Performance Line Receivers
High-Fidelity Active Filters
The LME49713's outstanding CMRR (88dB), PSRR
(100dB), and VOS (0.05mV) give the amplifier
excellent operational amplifier DC performance.
KEY SPECIFICATIONS
The LME49713 is available in an 8-lead narrow body
SOIC and an 8-lead TO-99. Demonstration boards
are available.
•
•
Power Supply Voltage Range: ±5V to ±18V
THD+N, f = 1kHz (AV = 1, RL = 100Ω,
VOUT = 3VRMS): 0.0006% (typ)
•
THD+N, f = 1kHz (AV = 1, RL = 600Ω,
VOUT = 1.4VRMS): 0.00036% (typ)
Input Noise Density: 1.9nV/√Hz (typ)
Slew Rate: ±1900V/μs (typ)
•
•
•
Bandwidth (AV = –1, RL= 2kΩ, RF = 1.2kΩ):
132 MHz (typ)
•
•
Input Bias Current: 1.8μA (typ)
Input Offset Voltage: 0.05mV (typ)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated