LM95245
www.ti.com
SNIS148G –OCTOBER 2007–REVISED MARCH 2013
Precision Remote Diode Digital Temperature Sensor with TruTherm® BJT Beta
Compensation Technology for 45nm Process
Check for Samples: LM95245
1
FEATURES
DESCRIPTION
The LM95245 is an 11-bit digital temperature sensor
with a 2-wire System Management Bus (SMBus)
interface and TruTherm technology that can monitor
the temperature of a remote diode as well as its own
temperature. The LM95245 can be used to very
accurately monitor the temperature of external
devices such as microprocessors. TruTherm
technology allows the LM95245 to precisely monitor
thermal diodes found in 90 nm and smaller geometry
processes. The LM95245 is specifically targeted for
Intel processors on 45nm process. LM95245 reports
temperature in two different formats for +127.875°C/-
128°C range and 0°C/255°C range. The LM95245
T_CRIT and OS outputs are asserted when either
unmasked channel exceeds its programmed limit and
can be used to shutdown the system, to turn on the
system fans, or as a microcontroller interrupt function.
The current status of the T_CRIT and OS pins can be
read back from the status registers via the SMBus
interface. All limits have a shared programmable
hysteresis register.
2
•
Remote and Local Temperature Channels
Targeted for Intel 45nm Processor Diodes
•
•
Two Formats: −128°C to +127.875°C and 0°C to
255.875°C
•
•
•
•
•
•
Digital Filter for Remote Channel
Programmable TCRIT and OS Thresholds
Programmable Shared Hysteresis Register
Diode Fault Detection
Mask, Offset, and Status Registers
SMBus 2.0 Compatible Interface, Supports
TIMEOUT
•
Programmable Conversion Rate for Best
Power Consumption
•
•
•
Three-Level Address Pin
Standby Mode One-Shot Conversion Control
Pin-for-Pin Compatible With the LM95235 and
LM86, LM89, LM99
The remote temperature channel of the LM95245 has
•
8-Pin VSSOP and SOIC Packages
a
programmable digital filter. The LM95245 is
targeted for a typical Intel® processor on a 45 nm, 65
nm or 90nm process, and has an offset register for
maximum flexibility and best accuracy.
APPLICATIONS
•
Processor/Computer System Thermal
Management (For Example, Laptops,
Desktops, Workstations, Servers)
The LM95245 has a three-level address pin to
connect up to 3 devices to the same SMBus master,
that is shared with the OS output. The LM95245 has
a programmable conversion rate register and a
standby mode to save power. One conversion can be
triggered in standby mode by writing to the one-shot
register.
•
•
Electronic Test Equipment
Office Electronics
KEY SPECIFICATIONS
•
•
•
Supply Voltage 3.0 to 3.6 V
Supply Current, Conv. Rate = 1 Hz 350 µA (typ)
Remote Diode Temperature Accuracy
–
TA = 25°C to 85°C; TD = 50°C to 105°C, ±0.75
°C (max)
–
TA = 25°C to 85°C; TD = 40°C to 125°C, ±1.5
°C (max)
•
•
Local Temperature Accuracy
TA = 25°C to 100°C, ±2.0 °C (max)
Conversion Rate, Both Channels 16 to 0.4 Hz
–
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated