LM96080
www.ti.com
SNAS465D –SEPTEMBER 2009–REVISED MARCH 2013
LM96080 System Hardware Monitor with 2-Wire Serial Interface
Check for Samples: LM96080
1
FEATURES
DESCRIPTION
LM96080, compatible to LM80, is a hardware monitor
that contains a 10-bit delta-sigma ADC capable of
measuring 7 positive voltages and local temperature.
The LM96080 also measures the speed of two fans
and includes other hardware monitoring on an I2C®
interface. The LM96080 includes a sequencer that
performs WATCHDOG window comparisons of all
measured values and its interrupt outputs become
active when any values exceed the programmed
limits.
2
•
•
Local Temperature Sensing
7 Positive Voltage Inputs with 10-bit
Resolution
•
•
•
•
2 Programmable Fan Speed Monitoring Inputs
2.5 mV LSb and 2.56V Input Range
Chassis Intrusion Detector Input
WATCHDOG Comparison of All Monitored
Values
•
Separate Input to Show Status in Interrupt
Status Register of Additional External
Temperature Sensors Such as the LM26/27,
LM56/57, LM73, or LM75
I2C Serial Bus Interface Compatibility,
Supports Standard Mode, 100 kbits/s, and Fast
Mode, 400 kbits/s
The LM96080 is especially suited to interface to both
linear and digital temperature sensors. The 2.5 mV
LSb (least significant bit) and 2.56 volt input range is
ideal for accepting inputs from a linear sensor such
as the LM94022. The BTI is used as an input from
either digital or thermostat sensors such as LM73,
LM75, LM56, LM57, LM26, LM27, LM26LV, or other
LM96080.
•
•
•
Shutdown Mode to Minimize Power
Consumption
The LM96080 supports Standard Mode (Sm, 100
kbits/s) and Fast Mode (Fm, 400 kbits/s) I2C interface
modes of operation. LM96080 includes an analog
filter on the I2C digital control lines that allows
improved noise immunity and supports TIMEOUT
reset function on SDA and SCL that prevents I2C bus
lockup. Three I2C device address pins allow up to 8
parts on a single bus.
Programmable RST_OUT/OS Pin: RST_OUT
Provides a Reset Output; OS Provides an
Interrupt Output Activated by an
Overtemperature Shutdown Event
•
Software and Pin Compatible with the LM80
APPLICATIONS
The LM96080's 3.0V to 5.5V supply voltage range,
low supply current, and I2C interface make it ideal for
a wide range of applications. Operation is ensured
•
•
Communications Infrastructure
System Thermal and Hardware Monitoring for
Servers
over the temperature range of (−40)°C ≤ TA
≤
+125°C. The LM96080 is available in a 24-pin
TSSOP package.
•
•
Electronic Test Equipment and
Instrumentation
Office Electronics
KEY SPECIFICATIONS
•
•
•
•
•
•
•
•
Total Unadjusted Error ±1 %FS (Max)
Differential Non-Linearity ±1 Lsb (Max)
Supply Voltage Range +3.0 V to +5.5 V
Supply Current (Operating) 0.370 mA Typ
Supply Current (Shutdown) 0.330 mA Typ
ADC Resolution 10 Bits
Temperature Resolution 0.5°C/0.0625°C
Temperature Accuracy ±3°C (Max)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated