5秒后页面跳转
LM8335TLE/NOPB PDF预览

LM8335TLE/NOPB

更新时间: 2022-03-24 05:59:13
品牌 Logo 应用领域
德州仪器 - TI /
页数 文件大小 规格书
16页 1206K
描述
LM8335 General Purpose Output Expander with MIPI® RFFE Host Interface

LM8335TLE/NOPB 数据手册

 浏览型号LM8335TLE/NOPB的Datasheet PDF文件第2页浏览型号LM8335TLE/NOPB的Datasheet PDF文件第3页浏览型号LM8335TLE/NOPB的Datasheet PDF文件第4页浏览型号LM8335TLE/NOPB的Datasheet PDF文件第5页浏览型号LM8335TLE/NOPB的Datasheet PDF文件第6页浏览型号LM8335TLE/NOPB的Datasheet PDF文件第7页 
LM8335  
www.ti.com  
SNVS840 JUNE 2012  
LM8335 General Purpose Output Expander with MIPI® RFFE Host Interface  
Check for Samples: LM8335  
1
FEATURES  
2
MIPI RFFE Interface Version 1.10 Compliant  
KEY SPECIFICATIONS  
Supports Output Expansion  
1.8 ± 0.15V MIPI RFFE Operation (VIO)  
1.8 ± 0.15V Core Supply (VDD  
1.65 to 3.6V GPO Supply (VDDIO  
Host Interface Address Select Pin:  
)
ADR=GND, USID[3:0]=0001  
ADR=VDD, USID[3:0]=1001  
)
Low Standby and Active Current  
On-Chip Power-On Reset (POR)  
30 to +85°C Ambient Temperature Range  
16-Bump DSBGA Package  
Pin-Configurable Initial State: VIO  
CFG=GND, GPO High-z, with Weak Internal  
Pull-Down Resistor Enabled;  
GPO_OUT_DATA is Unmasked  
1.965 mm x 1.965 mm x 0.6 mm, 0.5 mm  
Pitch (Nominal)  
CFG=VDD, GPO High-z, with Weak Internal  
Pull-Down Resistor Enabled;  
GPO_OUT_DATA is Masked  
DESCRIPTION  
Three Sources for Chip Reset:  
The LM8335 General Purpose Output Expander is a  
dedicated device to provide flexible and general  
purpose, host programmable output expansion  
functions. This device communicates with a host  
processor through a MIPI® RFFE Interface (Mobile  
Industry Processor Interface RF Front-End).  
VIO Input Pin  
POR  
Software-Commanded Reset  
APPLICATIONS:  
Eight general purpose outputs (GPO) can be  
configured by the host controller as drive  
high/low/high-z. Weak pull-ups (PU) or weak pull-  
downs (PD) can be enabled.  
Smart Handheld Devices  
RF Transceiver Applications  
Upon power-on, the LM8335 default configuration is  
for all GPO to be set based on the state of the CFG  
pin.  
After startup, any changes to the default configuration  
must be sent from the host via the MIPI RFFE host  
interface..  
The LM8335 is available in a 16-bump lead-free  
DSBGA package of size 1.965 mm x 1.965 mm x 0.6  
mm (0.5 mm pitch).  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
All trademarks are the property of their respective owners.  
PRODUCT PREVIEW information concerns products in the  
formative or design phase of development. Characteristic data and  
other specifications are design goals. Texas Instruments reserves  
the right to change or discontinue these products without notice.  
Copyright © 2012, Texas Instruments Incorporated  

与LM8335TLE/NOPB相关器件

型号 品牌 描述 获取价格 数据表
LM8335TLENOPB TI LM8335 General Purpose Output Expander with M

获取价格

LM8335TLX TI LM8335 General Purpose Output Expander with M

获取价格

LM8335TLX/NOPB TI LM8335 General Purpose Output Expander with M

获取价格

LM833AN TI IC,OP-AMP,DUAL,BIPOLAR,DIP,8PIN,PLASTIC

获取价格

LM833AN/A+ TI IC,OP-AMP,DUAL,BIPOLAR,DIP,8PIN,PLASTIC

获取价格

LM833AN/B+ TI IC,OP-AMP,DUAL,BIPOLAR,DIP,8PIN,PLASTIC

获取价格