Spec. No. : C515M3
Issued Date : 2003.04.02
Revised Date : 2005.01.11 .
Page No. : 1/4
CYStech Electronics Corp.
Low Current Positive Voltage Regulator
SOT-89
LM78L05XM3
Description
O G I
The LM78L05XM3 series of surface mount regulators are easy-to-
use devices suitable for multitude of applications that require a regulated supply of up to 100mA. These regulators
feature internal current limiting and thermal shutdown, making them remarkably rugged. No external components are
required with the LM78L05XM3 devices in many applications.
These devices offer a substantial performance advantage over the traditional zener diode resistor combination, as
output impedance and quiescent current are substantially reduced.
Features:
• Wide Range Of Available, Fixed Output Voltages
• Internal Short-Circuit Current Limiting
• Internal Thermal Overload Protection
• No External Components Required
• Pb-free package
Absolute Maximum Ratings (Ta=25°C)
• Input Voltage....................................................................................................................................................... 30 V
• Total Power Dissipation.................................................................................................................. Internally limited
• Operating Temperature Range .......................................................................................................... 0 °C to +125 °C
• Maximum Junction Temperature ..................................................................................................................... 125 °C
• Storage Temperature Range........................................................................................................... -55 °C to +150 °C
• Lead Temperature (Soldering 10S).................................................................................................................. 260 °C
Typical Application
Vin
Schematic Diagram
Vout
Vin
LM78L05
5K
5.7K
100
1.5K 1.9K
Vout
100
576
C1
C2
5pF
3.41K
13K
3.89K
7.8K
2.23K
A common ground is required between the
input and the output voltages. The input
voltage must remain typically 2.0V above
the output voltage even during the low point
2.84K
on the input ripple voltage.
GND
Note : C1 and C2 are required if regulator is located
far from power supply filter and load, or oscillation
may induced on the loop.
LM78L05XM3
CYStek Product Specification