VE Series Ring Lights
Datasheet
LED Ring Lights (in two sizes) for use with VE Series vision sensors
•
•
Low-cost ring lights for VE Series vision sensors
Solid-state LED matrix; select continuous or strobed operation via
sensor software
•
•
Direct connection to a VE Series vision sensor if the sensor is powered
by 24 V dc
Mounts directly to a VE Series vision sensor using the included hardware
Models
62 × 62 mm Models
LEDIRV62X62M
LEDRRV62X62M
LEDWRV62X62M
LEDBRV62X62M
LEDGRV62X62M
80 × 80 mm Models
LEDIRV80X80M
LEDRRV80X80M
LEDWRV80X80M
LEDBRV80X80M
LEDGRV80X80M
Color
Connection
Infrared, 940 nm
Visible red, 630 nm
White, all visible
300 mm (12 in) cable with a threaded 3-pin
Pico-style connector
Visible blue, 464 nm to 475 nm
Visible green, 520 nm to 540 nm
NOTE: Ring lights are not compatible with VELC..- Sealed Lens Covers. Use another lighting technique
if an IP67 rating is needed for your application.
Install the Ring Light
1. Attach the ring light bracket to the sides of the VE Series vision sensor using the provided hardware kit.
2. Connect the cable to the sensor.
Specifications
Supply Voltage and Current
Useful Life
10,000 hours (LED ON time). When operated within specifications,
Voltage is supplied by the VE Series vision sensors, if operating at 24 V
dc (see sensor manual, p/n 191666)
62 × 62 Models: Infrared—24 V dc at 100 mA max.
80 × 80 Models: 24 V dc at 250 mA max.
All other colors: 24 V dc at 130 mA max.
output decreases less than 30% after 10,000 hours and less than 50%
(less than 40% for red and IR models) after 20,000 hours
Operating Conditions
0 °C to +50 °C (+32 °F to +122 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Connection
300 mm (12 in) cable with a threaded 3-pin Pico-style connector
Environmental Rating
IEC IP20 with a qualified lens properly installed
Construction
Cold-rolled steel with black gloss e-coat plating, acrylic window, four
M3 × 6 mm screws are included to attach the ring light to the VE
Series vision sensor
Certifications
Light Source
LED, see the Models table for wavelengths
Strobe Type
Active low
Original Document
192656 Rev. B
1 June 2016
192656