LED Highly-Diffused Light (25 mm)
Features
• Designed to minimize surface textures and elevation changes, while providing
uniform illumination over the field of view
• 25 mm x 25 mm light aperture
• Provides uniform lighting for specular surfaces
• Black anodized aluminum housing
• The suggested field of view is 12 mm x 12 mm and the suggested stand off is 25 mm
LED Highly-Diffused Light Model
Illumination
Type
Supply
Voltage
Supply
Current
Models
Color
Cable
Connections
Pin 3 = dc common
Pin 4 = +V
0.5 m (18")
terminated
with 9-pin
D-sub
connector
(male pins)
Continuous
highly-diffused
light
12V dc 10ꢀ
with voltage
regulation of 1ꢀ
Power supply model
PSA-12(E) or
PS2V-12(E)
is recommended
(see other side)
LEDRS25N†
Red 640 nm
420 mA max.
† This model is not stocked and is non-returnable.
Useful Life
60,000 hours
Environmental Rating
Operating Conditions
IEC IP20; NEMA 1
Temperature: 0° to 40°C (+32° to 104°F)
Maximum relative humidity: 95ꢀ at 40°C (non-condensing)
22.3 mm
(0.88")
40.1 mm
(1.58")
25 mm
(0.98")
Light Aperture
0.5 m
(18")
25 mm
(0.98")
Light Aperture
M6 x 1.0 Thru (2x)
61.3 mm
(2.41")
25.4 mm
(1.00")
115.3 mm
(4.54")
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Printed in USA
05/01
P/N 67441