LED..R..W Series Ring Lights
Datasheet
®
LED Ring Lights (in two sizes) for use with PresencePLUS Pro, ProII, and Mini Pro sensors
®
•
•
•
Low-cost ring lights for PresencePLUS Pro, ProII, and Mini Pro sensors
Solid-state LED matrix; select continuous or strobed operation via sensor software
®
Direct connection to a PresencePLUS Pro, ProII, and Mini Pro sensor, or to an external
power supply using 3 discrete wires
®
•
Mounts directly to a PresencePLUS Pro, ProII, and Mini Pro sensor using the included
hardware
Models
PresencePLUS Pro and ProII Sensor Models
Color Ambient Light Filter Kit
1
Model
Polarizing Filter Kit
62 × 62 mm
80 × 80 mm
62 × 62 mm
80 × 80 mm
—
LEDIR62X62W
LEDRR62X62W
LEDIR80X80W
LEDRR80X80W
Infrared, 940 nm
FLTI
—
FLTR (included with
LEDRRPFK)
Visible Red, 630 nm
LEDWR62X62W
LEDBR62X62W
LEDGR62X62W
LEDWR80X80W
LEDBR80X80W
LEDGR80X80W
White, All Visible
FLTB or FLTG
FLTB
LEDRRPFKS
LEDRRPFK
Blue, 464 to 475 nm
Green, 520 to 540 nm
FLTG
PresencePLUS Mini Pro Sensor Models
Ambient Light Filter Kit
1
Models
62 × 62 mm
LEDIRM62X62W
Color
Polarizing Filter Kit
62 × 62 mm
—
80 × 80 mm
Infrared, 940 nm
FLTI
—
FLTR (included with
LEDRRPFK)
LEDRRM62X62W
Visible Red, 630 nm
LEDWRM62X62W
LEDBRM62X62W
LEDGRM62X62W
White, All Visible
FLTB or FLTG
FLTB
LEDRRPFKS
LEDRRPFK
Blue, 464 to 475 nm
Green, 520 to 540 nm
FLTG
Installing the Ring Light
The ring light bracket attaches to the top of the PresencePLUS lens block, using the hardware kit provided.
Note: Before installing this light it is recommended that an ambient light filter be installed behind the lens. The filter improves
image quality by reducing unwanted ambient light.
Wiring Table
PresencePLUS Pro Controller Terminal
Block
External Power Supply
(Continuous)
Light Wire
External Power Supply (Strobed)
Brown
Blue
Pin 1 (+V*)
Pin 2 (–V*)
+V
+V
–V
–V
+5V dc to +24V dc OFF
–V ON
White
Pin 4 (strobe)
–V
* +V = 24V dc 10ꢀ; –V = dc common
1
For 9 m (30 ft) integral cable, add suffix "W/30" to the model number (for example, LEDIR80X80W W/30).
Original Document
108626 Rev. H
19 February 2019
108626