LED..B..W Series Backlights
Datasheet
Visible red or infrared backlights in 2 sizes, with 3-conductor cable
®
•
•
•
•
Diffused backlight for PresencePLUS Pro sensors.
Continuous light and strobed operation, selectable via sensor software
Solid-state LED matrix, in two sizes
Direct connection to PresencePLUS Pro or to an external power supply using 3
discrete wires
•
•
Two sizes available; see models table
Bracket option(s) available for all models
Models
Model
LED Color
Wave Length
Active Area
LEDIB70X70W
LEDRB70X70W
LEDIB85X220W
LEDRB85X220W
Infrared
940 nm
660 nm
940 nm
660 nm
71 mm × 71 mm
(2.8 in × 2.8 in)
Visible Red
Infrared
85 mm × 220 mm
(3.35 in × 8.67 in)
Visible Red
To order the 9 m (30 ft) integral cable model, add the suffix “W/30” to the model number (for example, LEDIB70X70W W/30).
Specifications
Light Source
Construction
LED; see models table for wavelengths
Low-carbon steel with black zinc plating, acrylic window
Illumination
Useful Life
Diffused for use in applications needing a backlit light source.
10,000 hours (LED ON time). When operated within specifications, output
will decrease less than 30% after 10,000 hours and less than 40% after
20,000 hours.
Supply Voltage and Current
70 X 70 mm models: 24 V dc at 250 mA max.
85 x 220 mm models: 24 V dc at 500 mA max.
Operating Conditions
0 °C to 50 °C (32 °F to 122 °F)
90% at 50 °C (non-condensing) max. relative humidity
Connections
2 m (6.5 ft) or 9 m (30 ft) PUR-jacketed, 3-conductor attached cable
Certifications
Wiring Table
External Power Supply
Backlight Wire
PresencePLUS Pro
Controller Terminal Block
External Power Supply
(Continuous)
(Strobed)
1
Brown
Blue
Pin 1 (+V
Pin 2 (–V
)
+V
–V
+V
–V
–V
2
)
Black
Pin 4 (strobe)
+5 V dc
–V
OFF
ON
1
2
+V = 24V dc 10%
–V = dc common
Original Document
115349 Rev. D
22 February 2019
115349