LED Driver
xppower.com
LDU20 Series
•
•
•
•
•
•
•
Constant Current Output
LED Drive Current up to 700 mA
LED Strings from 2 V to 28 V
PWM & Analog Dimming Control
High Efficiency ꢀ up to 95%
Open or Short Circuit LED Protection
3 Year Warranty
Specification
Input
General
Input Voltage
Input Filter
Input Surge
• 7-30 VDC
• Capacitor
• 40 VDC for 0.5 s
Efficiency
• See tables
• 70-450 kHz variable
• >1.6 MHrs to MIL-HDBK-217F at 25 /C,
GB
Switching Frequency
MTBF
Output
Output Voltage
• See tables
Environmental
(Vin must be at least 2 V greater than Vout)
Operating Temperature • -40 /C to +70 /C
Storage Temperature • -40 /C to +125 /C
Humidity
Output Current
Output Current Trim
Output Current
Accuracy
• See tables
• 25-100%
• Up to 95%, non-condensing
• 40 /CꢀW
•
10
Thermal Impedance
Ripple & Noise
• 450 mV pk-pk max,
measured with 20 MHz bandwidth
EMC
Short Circuit Protection • Current is limited to the rated output
Emissions
• EN55022 class B conducted & radiated
with external components - see
application notes
• EN61000-4-2, level 2 Perf Criteria A
• EN61000-4-3, level 2 Perf Criteria A
• EN61000-4-4, level 2 Perf Criteria A
• EN61000-4-5, level 2 Perf Criteria A
• EN61000-4-6, level 2 Perf Criteria A
Temperature
Coefficient
•
0.05%ꢀ/C max
Remote On/Off
• On = 0.3-1.25 V or open circuit
Off = ≤0.15 V (applied to control pin)
Quiescent input current is 25 µA max,
ESD Immunity
Radiated Immunity
EFT/Burst
Remote On/Off Signal • 1 mA max
Current
Surge
Conducted Immunity
Dimming
PWM
Output Current Range • 25% to 100%
Operating Frequency
On Time
Off Time
• 1 kHz max
• 200 ns min
• 200 ns min
• 1.25 V max
Amplitude
DC Voltage Control
Output Current Range • 25% to 100%
Control Input
• 0.3 to 1.25 V max
Variable Resistor
Output Current Range • 25% to 100%