LED Driver
LDU Series
xppower.com
•
•
•
•
•
•
•
Constant Current Output
LED Drive Current up to 1000 mA
LED Strings from 2 V to 57 V
PWM & Analog Dimming Control
High Efficiency ꢀ up to 95%
Open or Short Circuit LED Protection
3 Year Warranty
Specification
Input
General
Input Voltage
• LDU08 & 24: 7-30 VDC
Efficiency
• See tables
LDU48: 7-60 VDC
Switching Frequency
• LDU08: 40-380 kHz variable
LDU24: 50-330 kHz variable
LDU48: 20-500 kHz variable
• LDU08: >1.6 MHrs
LDU24: >1.6 MHrs
Input Filter
Input Surge
• Capacitor
• LDU08 & 24: 40 VDC for 0.5 s
LDU48: 65 VDC for 0.5 s
MTBF
Output
Output Voltage
LDU48: >950 KHrs
to MIL-HDBK-217F at 25 °C, GB
• See tables
(Vin must be at least 2 V greater than Vout)
Environmental
Output Current
Output Current Trim
• See tables
• 25-100%
Operating Temperature • LDU08: -40 °C to +85 °C,
Output Current
Accuracy
• LDU08: 6.0% max
LDU24: 8.0% max
LDU48: 8.0% max
LDU24: -40 °C to +85 °C,
LDU24 1000 mA unit: -40 °C to +70 °C,
LDU48: See derating curves
Ripple & Noise
• LDU08: 200 mV pk-pk max
LDU24: 250 mV pk-pk max
(except 1000 mA units: 300 mV pk-pk max)
LDU48: See tables
measured with 20 MHz bandwidth
Case Temperature
• LDU08 & 24: +100 °C max
LDU48: +110 °C max
Storage Temperature • -40 °C to +125 °C
Humidity
• Up to 95%, non-condensing
Thermal Impedance
• 35-50 °C/W model dependant
• IP67 (wired versions)
Short Circuit Protection • Current is limited to the rated output
Ingress Protection
Rating
Temperature
Coefficient
• LDU08: 0.03%/°C max
LDU24: 0.08%/°C max
LDU48: 0.03%/°C max
Remote On/Off
• On = 0.3-1.25 V or open circuit
Off = ≤0.15 V (applied to control pin)
LDU08 & 24: Quiescent input current is
25 µA max,
EMC
Emissions
• EN55022 class B conducted & radiated
with external components - see
application notes
LDU48: Quiescent input current is
100 µA max
Remote On/Off Signal • 1 mA max
ESD Immunity
Radiated Immunity
EFT/Burst
• EN61000-4-2, level 2 Perf Criteria A
• EN61000-4-3, level 2 Perf Criteria A
• EN61000-4-4, level 2 Perf Criteria A
• EN61000-4-5, level 2 Perf Criteria A
• EN61000-4-6, level 2 Perf Criteria A
Current
Dimming
Surge
PWM
Conducted Immunity
Output Current Range • 25% to 100%
Operating Frequency
On Time
Off Time
• 1 kHz max
• 200 ns min
• 200 ns min
• 1.25 V max
Amplitude
DC Voltage Control
Output Current Range • 25% to 100%
Control Input
• 0.3 to 1.25 V max
Variable Resistor
Output Current Range • 25% to 100%