LED Driver
xppower.com
LDU05/07/14 Series
•
•
•
•
•
•
•
Constant Current Output
LED Drive Current up to 1000 mA
LED Strings from 2 V to 14 V
PWM & Analog Dimming Control
High Efficiency ꢀ up to 93%
Open or Short Circuit LED Protection
3 Year Warranty
Specification
Input
General
Input Voltage
Input Filter
Input Surge
• 7-16 VDC
• Capacitor
• 20 VDC for 0.5 s
Efficiency
• See tables
Switching Frequency
• LDU05: 60-ꢀ00 kHz variable
LDU07: 120-ꢀ50 kHz variable
LDU14: 90-400 kHz variable
Output
Output Voltage
MTBF
• >ꢀ.ꢀ MHrs to MIL-HDBK-217F at 25 /C,
GB
• See tables
(Vin must be at least 2 V greater than Vout)
Environmental
Output Current
Output Current Trim
Output Current
Accuracy
Ripple & Noise
• See tables
• 25-100%
• See tables
Operating Temperature • -40 /C to +85 /C except LDU14
1000 mA unit: -40 /C to +70 /C,
Storage Temperature • -40 /C to +125 /C
Humidity
• See tables,
measured with 20 MHz bandwidth
• Up to 95%, non-condensing
• ꢀ5 /CꢁW model dependant
Thermal Impedance
Short Circuit Protection • Current is limited to the rated output
Temperature
Coefficient
Remote On/Off
•
0.0ꢀ%ꢁ/C max
EMC
• On = 0.ꢀ-1.25 V or open circuit
Off = ≤0.15 V (applied to control pin)
Quiescent input current is 25 µA max,
Emissions
• EN55022 class B conducted & radiated
with external components - see
application notes
• EN61000-4-2, level 2 Perf Criteria A
• EN61000-4-ꢀ, level 2 Perf Criteria A
• EN61000-4-4, level 2 Perf Criteria A
• EN61000-4-5, level 2 Perf Criteria A
• EN61000-4-6, level 2 Perf Criteria A
Remote On/Off Signal • 1 mA max
ESD Immunity
Radiated Immunity
EFT/Burst
Current
Dimming
PWM
Surge
Output Current Range • 25% to 100%
Conducted Immunity
Operating Frequency
On Time
Off Time
• 1 kHz max
• 200 ns min
• 200 ns min
• 1.25 V max
Amplitude
DC Voltage Control
Output Current Range • 25% to 100%
Control Input
• 0.ꢀ to 1.25 V max
Variable Resistor
Output Current Range • 25% to 100%