LCR60, e3
LOW CAPACITANCE RECTIFIER
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The LCR60 low capacitance rectifier is used in parallel applications with a low-
capacitance transient voltage suppressor (TVS) such as the SAC5.0-50 series
for unidirectional applications as shown in Figure 4. It is rated for 44 Amp
forward surges to compliment this 500 Watt TVS series and also provide a
low capacitance and a low forward (VF) voltage with fast response time. The
low capacitance rating of 30 pF when used in parallel to the SAC series will
result in a total capacitance of 60 pF or less at zero volts for protecting higher
frequency applications from inductive switching threats or electrical systems
involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-
160D or ARINC 429 for airborne avionics. With their fast response time, they
also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4
DO-41
respectively.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
Suppresses transient in forward direction up to 500
Watts Peak Pulse Power @ 10/1000 µs
•
Low-capacitance Rectifier to compliment the low
capacitance TVS series for unidirectional
applications
Economical small plastic surface mount with robust
axial subassembly package
•
•
•
Improved protection of low capacitance TVS
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for
added 100% temperature cycle -55oC to +125oC
(10X) as well as surge (3X) and 24 hours HTRB with
post test VZ & IR
Low Capacitance for data-line protection to 10 MHz
Protection for aircraft fast data rate lines per select
level waveforms in RTCA/DO-160D & ARINC 429
with bit rates of 100 kb/s (per ARINC 429, Part 1,
par. 2.4.1.1)
•
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, or MSP prefixes
respectively to part number, e.g. MXLCR60,
MVLCR60, etc.
•
•
ESD and EFT protection per IEC61000-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance in the forward
direction for Class 1, 2, 3, and 4
•
•
Also available in surface mount package with part
number HSMBJLCR60 (see separate data sheet)
•
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance in the forward
direction for Class 1, 2, and 3
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
CASE: Void Free Transfer Molded Thermosetting Plastic
epoxy meeting UL94V-0
•
Forward Peak Pulse Current at 25oC: 44 Amps @ 10/1000
•
•
μs with repetition rate of 0.01% or less*
Steady State Power Dissipation* at TL = +75oC: 2.5 Watts.
FINISH: Tin-Lead or RoHS Compliant annealed matte-Tin
plating readily solderable per MIL-STD-750, method 2026
•
•
Clamping Speed (0 volts to V(BR) Min.) less than 5
nanoseconds.
Operating and Storage Temperature: -65oC to +150oC
•
•
•
POLARITY: Cathode Marked with Band
MARKING: Part number LCR60 or LCR60e3
WEIGHT: 0.1 Grams (Approx.)
•
ELECTRICAL CHARACTERISTICS @ 25oC
WORKING
PEAK
REVERSE
BREAKDOWN
VOLTAGE
@ I(BR) 1.0mA
V(BR)
REVERSE
CURRENT
@VRWM
IR
MAXIMUM
MAXIMUM
MAXIMUM
MICROSEMI
PART NUMBER
FORWARD PEAK PULSE CAPACITANCE
VOLTAGE
@ IPP
REVERSE
VOLTAGE
CURRENT*
RATING
IPP
@ 0 Volts
VF
VRWM
μA
Volts
Min.
220
Volts
7.0
Amps
44
Volts
200
pF
30
LCR60
LCR60e3
10
*See Figure 3
Copyright © 2005
9-12-2005 REV A
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503