TW
Hybrid D’Sub series
Specifications
Amphenol D’Sub TW Hybrid Series permits
a mix of contacts including signal, power,
shielded, high voltage and fiber optics in the
same housing with 18 different contacts
arrangements.
• Connectors according to: MIL C24308 - NFC93425 - HE507
Materials and platings
Electrical Data
Shells
Steel-Tin plating Current rating
Signal contacts
Power contacts
PCB terminations
Solder cup terminations
Crimp terminations
Shielded contacts
Voltage rating
Signal and power contacts 300 V.R.M.S. at 50 Hz
Shielded contacts
Shielded contacts
Frequency range
Attenuation
V. S. W. R.
Characteristic impedance
Dielectric withstanding
voltage
Insulation resistance ≥ 5000 M Ohms at 500 VDC
Contact resistance
Shell resistance
7.5 A. with 10 A. peaks
This economic series was fist developed from
our military series, and has improved features:
Insulators
Signal contacts
Material
Plating finish
Or
Shielded contacts
Material
Plating
Inner conductor
Outer ring
Terminations
Except solder cup and crimp terminations gold flash
Power contacts
Material
Plating
Contacts
Terminations
Except solder cup and crimp terminations gold flash
High temperature black thermoplastic
Female: machined bronze
10 to 40 A.
10 to 40 A.
10 to 40 A.
0.5 A.
Male: machined brass
16µ “Au over 79µ” Ni min.
30µ” Au over 79µ” Ni min.
- new contacts
- new high temperature black thermoplastic insert
- PCB configurations come preloaded with
fixed contacts and brackets.
Female: machined bronze
Male: machined brass
150 V.R.M.S. at 50 Hz
These connectors are supplied with screw
machined contacts which are fixed in the insulator.
16µ “Au or 30µm Au over 79µ” Ni
10µ “Au over 79µ” Ni
Tinned
0-1 GHz
0.2dB
1.4(+0.04/GHz)
50 Ohms
Acomplete range of housings are also
available for cable application.
Female: machined bronze
Male: machined brass
A full range of
arrangements
compatible with
reflow process
≥ 1000 V.R.M.S. at 50Hz
16µ “Au or 30µ” Au over 79µ” Ni
Tinned
≤ 5m Ohms
≤ 1m Ohm
Brackets
Steel-Tin plating
Brass-Tin plating
Brass-Tin plating
Bronze-Tin plating
Brass-Tin plating
(electrical grounding)
Front jackscrews
Rear clinch nuts
Boardlocks
Stand-off
• Commercial
Climatic Data
Mechanical data
With or without dimples
Operating temperature
-55˚C + 155˚C Shells
• Medical
(with peaks up to 180˚C)
56 days (40˚C - 95% HR)
48 hours
Contact retention force in dielectric material > 40N
• Industrial
• Telecom
Damp heat
Salt spray
Maximum mating and unmating force
With dimples
E size = 70 N
A size = 80 N
B size = 100 N
C size = 150 N
D size = 180 N
E size = 30 N
A size = 50 N
B size = 80 N
C size = 120 N
D size = 160 N
• Any application requiring
optimization of space
Without dimples
Compatible with process
IR - Air convectioned
260˚ for 20 s.
Resistance to solder iron heat
260˚C for 30 s.
Mating cycles
Blind mating system
≥ 200 (classe ll) or 500 (classe l)
Available upon request
Polarization
Available with locking accessories
Consult factory