KSZ8863MLL/FLL/RLL
Integrated 3-Port 10/100 Managed Switch
with PHYs
- Non-Blocking Switch Fabric Ensures Fast
Packet Delivery by Utilizing a 1k MAC Address
Lookup Table and a Store-and-Forward Archi-
tecture
- Full-Duplex IEEE 802.3x Flow Control (PAUSE)
with Force Mode Option
Features
• Advanced Switch Features
- IEEE 802.1q VLAN Support for Up to 16 Groups
(Full Range of VLAN IDs)
- VLAN ID Tag/Untag Options, Per Port Basis
- IEEE 802.1p/q Tag Insertion or Removal on a
Per Port Basis (Egress)
- Programmable Rate Limiting at the Ingress and
Egress on a Per Port Basis
- Broadcast Storm Protection with Percent Con-
trol (Global and Per Port Basis)
- IEEE 802.1d Rapid Spanning Tree Protocol
Support
- Half-Duplex Back Pressure Flow Control
- HP Auto MDI-X for Reliable Detection of and
Correction for Straight-Through and Crossover
Cables with Disable and Enable Option
®
- LinkMD TDR-Based Cable Diagnostics Permit
Identification of Faulty Copper Cabling
- MII Interface Supports Both MAC Mode and
PHY Mode
- Tail Tag Mode (1 byte Added before FCS) Sup-
port at Port 3 to Inform the Processor which
Ingress Port Receives the Packet and its Prior-
ity
- Comprehensive LED Indicator Support for Link,
Activity, Full-/Half-Duplex and 10/100 Speed
- HBM ESD Rating 4 kV
• Switch Monitoring Features
- Bypass Feature that Automatically Sustains the
Switch Function between Port 1 and Port 2
when CPU (Port 3 Interface) Goes to the Sleep
Mode
- Port Mirroring/Monitoring/Sniffing: Ingress and/
or Egress Traffic to Any Port or MII
- MIB Counters for Fully Compliant Statistics
Gathering 34 MIB Counters Per Port
- Loopback Modes for Remote Diagnostic of Fail-
ure
• Low Power Dissipation
- Full-Chip Software Power-Down (Register Con-
figuration Not Saved)
- Self-Address Filtering
- Individual MAC Address for Port 1 and Port 2
- Supports RMII Interface and 50 MHz Reference
Clock Output
- IGMP Snooping (IPv4) Support for Multicast
Packet Filtering
- Energy-Detect Mode Support
- IPv4/IPv6 QoS Support
- Dynamic Clock Tree Shutdown Feature
- Per Port Based Software Power-Save on PHY
(Idle Link Detection, Register Configuration Pre-
served)
- Voltages: Single 3.3V Supply with Internal 1.8V
LDO for 3.3V VDDIO
- MAC Filtering Function to Forward Unknown
Unicast Packets to Specified Port
• Comprehensive Configuration Register Access
- Serial Management Interface (SMI) to All Inter-
nal Registers
- MII Management (MIIM) Interface to PHY Reg-
isters
- High Speed SPI and I C Interface to All Internal
- Optional 3.3V, 2.5V, and 1.8V for VDDIO
- Transceiver Power 3.3V for VDDA_3.3
• Industrial Temperature Range: –40°C to +85°C
• Available in a 48-Pin LQFP, Lead-Free Package
2
Registers
- I/O Pins Strapping and EEPROM to Program
Selective Registers in Unmanaged Switch
Mode
Applications
- Control Registers Configurable on the Fly (Port-
Priority, 802.1p/d/q, AN…)
• VoIP Phone
• Set-Top/Game Box
• QoS/CoS Packet Prioritization Support
- Per Port, 802.1p and DiffServ-Based
- Re-Mapping of 802.1p Priority Field Per Port
basis, Four Priority Levels
• Proven Integrated 3-Port 10/100 Ethernet Switch
- 3rd Generation Switch with Three MACs and
Two PHYs Fully Compliant with IEEE 802.3u
Standard
• Automotive
• Industrial Control
• IPTV POF
• SOHO Residential Gateway
• Broadband Gateway/Firewall/VPN
• Integrated DSL/Cable Modem
• Wireless LAN Access Point + Gateway
• Standalone 10/100 Switch
2017 Microchip Technology Inc.
DS00002335B-page 1