Data Sheet: JN5168-001-Myy
JenNet-IP, ZigBee PRO and IEEE802.15.4 Module
Overview
Features: Module
The JN5168-001-Myy family is a range of ultra low power, high performance surface mount
modules targeted at IEEE 802.15.4, JenNet-IP, ZigBee Light Link, ZigBee Smart Energy and
RF4CE networking applications, enabling users to realise products with minimum time to
market and at the lowest cost. They remove the need for expensive and lengthy development
of custom RF board designs and test suites. The modules use NXP’s JN5168 wireless
microcontroller to provide a comprehensive solution with large memory, high CPU and radio
performance and all RF components included. All that is required to develop and manufacture
wireless control or sensing products is to connect a power supply and peripherals such as
switches, actuators and sensors, considerably simplifying product development.
•
2.4GHz IEEE 802.15.4, JenNet-IP,
ZigBee Light Link, ZigBee Smart Energy
and RF4CE compatible
•
JN5168-001-M00/03
up to 1km range (Ext antenna)
M00: integral antenna 16x30mm
M03: uFl connector 16x21mm
o
o
o
o
o
TX power +2.5dBm
Receiver sensitivity –95dBm
TX current 15.3mA
RX current 17mA
Four module variants are available: JN5168-001-M00 with an integrated antenna, JN5168-001-
M03 with an antenna connector and the JN5168-001-M05 and M06 with an antenna connector,
power amplifier and LNA for extended range. The JN5168-001-M05 output power has been
optimised for use in Europe and Asia.
2.0-3.6V operation
•
JN5168-001-M05
up to 2km range (Ext 2dBi Antenna)
Module Block Diagram
o
o
o
o
o
o
o
9.5 dBm TX Power
Receiver sensitivity -96dBm
uFl connector
TX current 35mA
RX current 22mA
16x30mm
XTAL
Watchdog
Timer
RAM
8/32K
Flash
64/160/256K
SPI Master & Slave
Matching
M00 Option
2.0-3.6V operation
Integrated Antenna
2.4GHz
Radio
Voltage
Brownout
2-Wire Serial
(Master/Slave)
•
JN5168-001-M06
up to 6km range (Ext 2 dBi Antenna)
Including
Diversity
32 -Bit
RISC CPU
4xPWM + Timers
O-QPSK
Modem
uFl
Connector
Matching
M03 Option
2x UART
20 DIO
o
o
o
o
o
o
o
22dBm TX Power
Receiver sensitivity -100dBm
uFl connector
TX current 175mA
RX current 22mA
16x30mm
4kB
EEPROM
IEEE802.15.4
MAC
Accelerator
External
Antenna
uFl
Connector
PA / LNA
Matching
Sleep Counter
M05/M06 Option
Power
Management
4 Chan 10-bit ADC
128-bit AES
Encryption
Accelerator
Battery and Temp
Sensor
2.0-3.6V operation
Power
Features: Microcontroller
•
•
•
32-bit RISC CPU, up to 32MIPs with low
power
Data EEPROM with guaranteed 100k
write operations
Benefits
Applications
RF4CE, JenNet-IP, ZigBee Smart
Energy stacks
•
Robust and secure low power wireless
applications
•
•
•
Microminiature module solutions
Ready to use in products
•
•
•
•
•
•
•
•
•
JTAG debug interface
•
•
ZigBee and JenNet-IP networks
Minimises product development
time
4-input 10-bit ADC, 1 comparator
5 x PWM (4 x timer, 1 x timer/counter)
2 UARTs
Home and commercial building
automation
•
•
No RF test required for systems
Compliant with
•
•
Utilities metering (e.g. AMR)
SPI Master & Slave port with 3 selects
2-wire serial interface
Location Aware services (e.g. Asset
Tracking)
o
o
FCC 47CFR Part 15C
•
•
Toys and gaming peripherals
Industrial systems
Battery and Temperature Sensor
Watchdog timer and BOR
Up to 20 DIO
IC Canada RSS 210 Issue 8 -
Annex 8,
•
•
Telemetry
Remote Control
o
o
o
ETSI EN 300-328 V1.7.1
EN 301-489-17 V2.1.1
Industrial temp (-40°C to +85°C)
Lead-free and RoHS compliant
EN60950-1-2006 +A1, A11, A12
JN-DS-JN5168-001-Myy
© NXP Laboratories UK 2013