JN5179-001-M1x
ZigBee 3.0, ZigBee PRO, Thread and IEEE802.15.4 modules
Rev. 2.0 — 26 October 2016
Product data sheet
1. General description
The JN5179-001-M1x (with x = 0, 3 or 6) module family provides designers with a
ready-made component that provides a fully integrated solution for applications, using the
IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee
Smart Energy and Home Automation and can be quickly and easily included in product
designs. The modules integrate all of the RF components required, removing the need to
perform expensive RF design and test. Products can be designed by simply connecting
sensors and switches to the module IO pins. The modules use NXP’s single chip
IEEE802.15.4 wireless microcontroller, allowing designers to make use of the extensive
chip development support material. Hence, this range of modules allows designers to
bring wireless applications to market in the minimum time with significantly reduced
development effort and cost.
3 variants are available: JN5179-001-M10, JN5179-001-M13 and JN5179-001-M16. All
modules have FCC modular approval. The JN5179-001-M10 and JN5179-001-M13 are
also CE-compliant and subject to a Notified Body Opinion.
The variants available are described in the Table 1.
1.1 Regulatory Approvals
The JN5179-001-M10 and JN5179-001-M13 have been tested against the requirements
of the following European standards.
• Radio EN 300 328 v 1.9.1
• EMC, EN 301 489-17 v 2.2.1, EN 62479 2010, EN 301 489-1 v 1.9.2
• Basic Safety Assessment (BSA) EN 60950-1:2006
A Notified Body statement of opinion for this standard is available on request.
The High-power module with M16 suffix is not approved for use in Europe.
Additionally, both module types have received FCC “Modular Approval”, in compliance
with CFR 47 FCC part 15 regulations and in accordance to FCC public notice DA00-1407.
The modular approvals notice and test reports are available on request.
The JN5179-001-M16 module is subject to user proximity restrictions under FCC
regulations; more specific information is available in Section 13.1.2.