®
ispLSI 1048E
In-System Programmable High Density PLD
Features
Functional Block Diagram
• HIGH DENSITY PROGRAMMABLE LOGIC
— 8,000 PLD Gates
Output Routing Pool
Output Routing Pool
F7 F6 F5 F4 F3 F2 F1 F0
E7 E6 E5 E4 E3 E2 E1 E0
— 96 I/O Pins, Twelve Dedicated Inputs
D7
D6
D5
D4
D3
D2
D1
D0
A0
A1
A2
A3
A4
A5
A6
A7
— 288 Registers
— High-Speed Global Interconnects
D
D
D
D
Q
Q
Q
Q
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— Functionally and Pin-out Compatible to ispLSI 1048C
Logic
Array
Global Routing Pool (GRP)
GLB
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
B0 B1 B2 B3 B4 B5 B6 B7
Output Routing Pool
C0 C1 C2 C3 C4 C5 C6 C7
Output Routing Pool
— fmax = 125 MHz Maximum Operating Frequency
— tpd = 7.5 ns Propagation Delay
CLK
— TTL Compatible Inputs and Outputs
— Electrically Eraseable and Reprogrammable
— Non-Volatile
0139G1A-isp
Description
— 100% Tested at Time of Manufacture
• IN-SYSTEM PROGRAMMABLE
The ispLSI 1048E is a High Density Programmable Logic
Device containing 288 Registers, 96 Universal I/O pins,
12 Dedicated Input pins, four Dedicated Clock Input pins,
twodedicatedGlobalOEinputpins,andaGlobalRouting
Pool(GRP).TheGRPprovidescompleteinterconnectivity
between all of these elements. The ispLSI 1048E offers
5Vnon-volatilein-systemprogrammabilityofthelogic,as
well as the interconnect to provide truly reconfigurable
systems. A functional superset of the ispLSI 1048 archi-
tecture, the ispLSI 1048E device adds two new global
output enable pins and two additional dedicated inputs.
— In-System Programmable (ISP™) 5V Only
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Four Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
The basic unit of logic on the ispLSI 1048E device is the
Generic Logic Block (GLB). The GLBs are labeled A0,
A1…F7(seeFigure1). Thereareatotalof48GLBsinthe
ispLSI 1048E device. Each GLB has 18 inputs, a pro-
grammableAND/OR/ExclusiveORarray,andfouroutputs
which can be configured to be either combinatorial or
registered. Inputs to the GLB come from the GRP and
dedicated inputs. All of the GLB outputs are brought back
into the GRP so that they can be connected to the inputs
of any other GLB on the device.
Copyright©2002LatticeSemiconductorCorp. Allbrandorproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveholders. Thespecificationsandinformationhereinaresubject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
January 2002
1048e_11
1