ISL9106
®
Data Sheet
June 29, 2007
FN6509.0
1.2A 1.6MHz Low Quiescent Current High
Efficiency Synchronous Buck Regulator
Features
• High Efficiency Integrated Synchronous Buck Regulator
with up to 95% Efficiency
ISL9106 is a 1.2A, 1.6MHz step-down regulator, which is
ideal for powering low-voltage microprocessors in compact
devices such as PDAs and cellular phones. It is optimized
for generating low output voltages down to 0.8V. The supply
voltage range is from 2.7V to 5.5V allowing the use of a
single Li+ cell, three NiMH cells or a regulated 5V input.
1.6MHz pulse-width modulation (PWM) switching frequency
allows using small external components. It has flexible
operation mode selection of forced PWM mode and Skip
• 2.7V to 5.5V Supply Voltage
• 17μA Quiescent Supply Current in Skip (Low I ) Mode
Q
• 1.2A Guaranteed Output Current
• 3% Output Accuracy Over Temperature/Load/Line
• Selectable Forced PWM Mode and Skip Mode
• Less than 1μA Logic Controlled Shutdown Current
• 100% Maximum Duty Cycle for Lowest Dropout
• Discharge Output Cap when Shutdown
• Internal Digital Soft-Start
(Low I ) mode with typical 17μA quiescent current for
Q
highest light load efficiency to maximize battery life.
The ISL9106 integrates a pair of low ON-resistance
P-Channel and N-Channel MOSFETs to maximize efficiency
and minimize external component count.
• Peak Current Limiting, Short Circuit Protection
• Over-Temperature Protection
The ISL9106 offers a typical 215ms Power-Good (PG) timer
when powered up. The timer output can be reset by RSI.
When shutdown, ISL9106 discharges the output capacitor.
Other features include internal digital soft-start, enable for
power sequence, overcurrent protection, and thermal
shutdown.
• Enable, Power Good Function
• 10 Ld 3mmx3mm DFN
• Pb-Free Plus Anneal Available (RoHS Compliant)
The ISL9106 is offered in 10 Ld 3mmx3mm DFN package
with 0.9mm typical height. The complete converter can
Applications
2
occupy less than 1cm area.
• Single Li-Ion Battery-Powered Equipment
• DSP Core Power
Ordering Information
PART
NUMBER
(Note)
TEMP.
RANGE
(°C)
• PDAs and Palmtops
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
Pinout
ISL9106IRZ
106Z
-40 to +85 10 Ld 3x3 DFN L10.3x3C
-40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9106
(10 LD 3X3 DFN)
TOP VIEW
ISL9106IRZ-T 106Z
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
2
3
4
5
10 SW
VIN
NC
EN
PGND
9
8
7
6
SGND
FB
PG
MODE
RSI
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.