ISL9107, ISL9108
®
Data Sheet
December 21, 2007
FN6612.0
1.5A 1.6MHz Low Quiescent Current High
Efficiency Synchronous Buck Regulator
Features
• Integrated Synchronous Buck Regulator with up to 95%
Efficiency
ISL9107 and ISL9108 are 1.6MHz synchronous step-down
regulators with integrated power switches capable of
delivering 1.5A output current, which is ideal for powering
low-voltage microprocessors in compact devices such as
PDAs and cellular phones. These devices are optimized for
generating low output voltages down to 0.8V. The supply
voltage range is from 2.7V to 5.5V allowing for the use of a
single Li+ cell, three NiMH cells or a regulated 5V input.
1.6MHz pulse-width modulation (PWM) switching frequency
allows using small external components. They have flexible
operation mode selection of forced PWM mode and Skip
• 2.7V to 5.5V Supply Voltage
• 1.5A Guaranteed Output Current
• 17μA Quiescent Supply Current in Skip (Low I ) Mode
Q
• Selectable Forced PWM Mode and Skip Mode
• Less Than 1µA Logic Controlled Shutdown Current
• 100% Maximum Duty Cycle for Lowest Dropout
• Discharge Output Capacitor when Shutdown
• Internal Digital Soft-Start
(Low I ) mode with typical 17μA quiescent current for
Q
highest light load efficiency to maximize battery life.
• Enable, Peak Current Limiting, Short Circuit Protection
• Over-Temperature Protection
The ISL9107 and ISL9108 integrate a pair of low
ON-resistance P-Channel and N-Channel MOSFETs to
maximize efficiency and minimize external component
count.
• Power-Good Function (for ISL9107 only)
• 8 Ld 2mmx3mm DFN
The ISL9107 offers a typical 215ms Power-Good (PG) timer
when powered up. The timer output can be reset by RSI.
When shutdown, ISL9107 and ISL9108 discharge the output
capacitor. Other features include internal digital soft-start,
enable for power sequence, overcurrent protection, and
thermal shutdown.
• Pb-Free (RoHS Compliant)
Applications
• Single Li-Ion Battery-Powered Equipment
• DSP Core Power
The ISL9107 and ISL9108 are offered in 8 Ld 2mmx3mm
DFN package with 0.9mm typical height. The complete
• PDAs and Palmtops
2
converter can occupy less than 1cm area.
Pinouts
Ordering Information
ISL9107
(8 LD 2X3 DFN)
TOP VIEW
PART
NUMBER
(Note)
TEMP.
RANGE
(°C)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
VIN
EN
1
2
3
4
8
7
6
5
SW
GND
FB
ISL9107IRZ-T 107
ISL9108IRZ-T 108
-40 to +85 8 Ld 2x3 DFN
-40 to +85 8 Ld 2x3 DFN
L8.2x3
L8.2x3
PG
*Please refer to TB347 for details on reel specifications.
MODE
RSI
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate PLUS ANNEAL - e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
ISL9108
(8 LD 2X3 DFN)
TOP VIEW
VIN
EN
1
2
3
4
8
7
6
5
SW
GND
FB
NC
MODE
NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.