DATASHEET
Radiation Hardened, 2-Terminal Temperature Transducer
ISL71590SEH
Features
The ISL71590SEH is a temperature-to-current transducer
possessing two terminals. It has a high impedance current output
that allows it to be insensitive to voltage drops across long lines.
When provided a differential voltage between 4V and 33V, the
device acts as a constant current regulator that generates a
current equal to 1µA/Kelvin (K).
• 50krad(Si) low dose rate (ELDRS) shift . . . . . . . . . . . . . < 1°C
• Linear output current . . . . . . . . . . . . . . . . . . . . . . . . . . . 1µA/K
• Wide power supply input range (V+ to V-) . . . . . . . 4V to 33V
• Low power consumption . . . . . . . . . . . . . . . . . . 1.5mW at 5V
• High output impedance provides excellent rejection to
variations in the supply line
The ISL71590SEH is specified across the -55°C to +125°C
temperature range and with ±1.7°C accuracy without the
need of additional circuitry, and also capable of operating up
to +150°C. With power requirements as low as 1.5mW (5V at
+25°C), it is an ideal choice for remote sensing applications as
any well-insulated twisted pair cable will allow for proper
operation. It can be used in several additional applications
including temperature compensation networks, flow rate
analysis, anemometry and biasing proportional to absolute
temperature.
• Additional linearization circuitry is not needed for operation
• Operating temperature range. . . . . . . . . . . .-55°C to +150°C
• QML qualified per MIL-PRF-38535 requirements
• Radiation environment
2
- SEL/SEB LET
. . . . . . . . . . . . . . . . . . . 86.4 MeV•cm /mg
TH
- Total dose, high dose rate. . . . . . . . . . . . . . . . . 300krad(Si)
- Total dose, low dose rate . . . . . . . . . . . . . . . . . 50krad(Si)*
* Product capability established by initial characterization. The
EH version is acceptance tested on a wafer-by-wafer basis to
50krad(Si) at low dose rate.
The high output impedance (>10MΩ) leaves plenty of room for
variations in the power supply voltage. It is electrically durable
as it can withstand a forward operating voltage of 33V over the
full temperature range both under and without ion beam
radiation and a reverse voltage of -40V.
• Electrically screened to SMD# 5962-13215
Related Literature
• AN1844, “ISL71590SEHXX Evaluation Board User’s Guide”
The ISL71590SEH is available in a 2 Ld flatpack and die forms.
Applications
• RF power amplifier bias compensation
• AN1895, “Total Dose Testing of the ISL71590SEH Radiation
Hardened Temperature Sensor”
• AN1894, “Single Event Effects (SEE) Testing of the
ISL71590SEH Temperature Sensor”
• LCD bias compensation
• Laser diode bias compensation
• Sensor bias and linearization
• Data acquisition systems
+4V to +33V (V+ TO V-)
0.0
-0.2
-0.4
+
T
HDR
V
= 1mV/K
-
OUT
-0.6
1kΩ
0.1%
ISL71590SEH
-0.8
-1.0
-1.2
LDR
0
25
50
100 125 150 200 250 300
TOTAL DOSE (krad(Si))
FIGURE 1. TYPICAL APPLICATION
FIGURE 2. I
SHIFT vs LOW/HIGH DOSE RATE RADIATION
OUT
June 3, 2016
FN8376.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2013, 2016. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
