DATASHEET
ISL6549
Rev X.00
Single 12V Input Supply Dual Regulator —Synchronous Rectified Buck PWM and
Linear Power Controller
The ISL6549 provides the power control and protection for
two output voltages in high-performance applications. The
Features
• Single 12V bias supply (no 5V supply is required)
dual-output controller drives two N-Channel MOSFETs in a
synchronous rectified buck converter topology and one
N-Channel MOSFET in a linear configuration. The controller is
ideal for applications where regulation of both the processing
unit and memory supplies is required.
• Provides two regulated voltages
- One synchronous rectified buck PWM controller
- One linear controller
• Both controllers drive low cost N-Channel MOSFETs
• Small converter size
- Adjustable frequency 150kHz to 1MHz
- Small external component count
The synchronous rectified buck converter incorporates
simple, single feedback loop, voltage-mode control with fast
transient response. Both the switching regulator and linear
regulator provide a maximum static regulation tolerance of
±1% over line, load, and temperature ranges. Each output is
user-adjustable by means of external resistors.
• Excellent output voltage regulation
- Both outputs: ±1% over temperature
• 12V down conversion
An integrated soft-start feature brings both supplies into
regulation in a controlled manner. Each output is monitored
via the FB pins for undervoltage events. If either output drops
below 75% of the nominal output level, both converters are
shut off and go into retry mode.
• PWM and linear output voltage range: down to 0.8V
• Simple single-loop voltage-mode PWM control design
• Fast PWM converter transient response
- High-bandwidth error amplifier
• Undervoltage fault monitoring on both outputs
• Pb-free plus anneal available (RoHS compliant)
The ISL6549 is available in a 14 Ld SOIC package,
16 Ld QSOP, or 16 Ld 4x4 QFN packages.
Applications
Related Literature
• Technical Brief TB363 Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)
•
Processor and memory supplies
• ASIC power supplies
• Embedded processor and I/O supplies
• DSP supplies
Ordering Information
PART NUMBER
PART MARKING
ISL6549CB
TEMP. RANGE (°C)
PACKAGE
PKG. DWG. #
M14.15
ISL6549CB
0 to 70
0 to 70
14 Ld SOIC
ISL6549CBZ (Note)
ISL6549CR
6549CBZ
14 Ld SOIC (Pb-free)
16 Ld 4x4 QFN
M14.15
ISL6549CR
6549CRZ
0 to 70
L16.4x4
L16.4x4
M16.15A
M16.15A
M16.15A
M14.15
ISL6549CRZ (Note)
ISL6549CA
0 to 70
16 Ld 4x4 QFN (Pb-free)
16 Ld QSOP
ISL6549CA
6549CAZ
0 to 70
ISL6549CAZ (Note)
ISL6549CAZA (Note)
ISL6549IBZ (Note)
ISL6549IRZ (Note)
ISL6549IAZ (Note)
ISL6549LOW-EVAL1
ISL6549HI-EVAL1
Add “-T” suffix for tape and reel.
0 to 70
16 Ld QSOP (Pb-free)
16 Ld QSOP (Pb-free)
14 Ld SOIC (Pb-free)
16 Ld 4x4 QFN (Pb-free)
16 Ld QSOP (Pb-free)
6549CAZ
0 to 70
6549IBZ
-40 to 85
-40 to 85
-40 to 85
6549IRZ
L16.4x4
M16.15A
6549IAZ
Evaluation Board 1-5A
Evaluation Board up to 20A
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets, molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Rev X.00
Page 1 of 18