ISL6529, ISL6529A
®
Data Sheet
April 12, 2005
FN9070.5
Dual Regulator–Synchronous Rectified
Buck PWM and Linear Power Controllers
Features
• Provides two regulated voltages
- One synchronous rectified buck PWM controller
- One linear controller
The ISL6529, ISL6529A provide the power control and
protection for two output voltages in high-performance
graphics cards and other embedded processor applications.
The dual-output controllers drive two N-Channel MOSFETs
in a synchronous rectified buck converter topology and one
N-Channel MOSFET in a linear configuration. The ISL6529,
ISL6529A provide both a regulated high current, low voltage
supply and an independent, lower current supply integrated
in a 14-lead SOIC package. The controllers are ideal for
graphic card applications where regulation of both the
graphics processing unit (GPU) and memory supplies is
required.
• Both controllers drive low cost N-Channel MOSFETs
• 12V direct drive saves external components
• Small converter size
- 600kHz constant frequency operation
- Small external component count
• Excellent output voltage regulation
- Both outputs: ±1% over temperature - ISL6529AC
- Both outputs: ±2% over temperature - ISL6529C
• 5V down conversion
• PWM and linear output voltage range: down to 0.8V
• Simple single-loop voltage-mode PWM control design
The synchronous rectified buck converters incorporate
simple, single feedback loop, voltage-mode control with fast
transient response. Both the switching regulator and linear
regulator provide a maximum static regulation tolerance of
±2% over line, load, and temperature ranges. Each output is
user-adjustable by means of external resistors.
• Fast PWM converter transient response
- High-bandwidth error amplifier
- Full 0-100% duty ratio
• Linear controller drives N-Channel MOSFET pass transistor
• Fully-adjustable outputs
An integrated soft-start feature brings both supplies into
regulation in a controlled manner. Each output is monitored
via the FB pins for undervoltage events. If either output
drops below 51.5% of the nominal output level, both
converters are shut down.
• Undervoltage fault monitoring on both outputs
• QFN Package:
- Compliant to JEDEC PUB95 MO-220
QFN - Quad Flat No Leads - Package Outline
Ordering Information
- Near Chip Scale Package footprint, which improves
PCB efficiency and has a thinner profile
TEMP.
PKG.
PART NUMBER* RANGE (°C)
PACKAGE
14 Ld SOIC
DWG. #
• Pb-Free Available (RoHS Compliant)
ISL6529ACB
0 to 70
0 to 70
0 to 70
0 to 70
M14.15
Applications
ISL6529ACBZ (Note)
ISL6529ACR
14 Ld SOIC (Pb-free) M14.15
•
Graphics–GPU and memory supplies
16 Ld 5x5 QFN
L16.5x5B
L16.5x5B
• ASIC power supplies
ISL6529ACRZ (Note)
16 Ld 5x5 QFN
(Pb-free)
• Embedded processor and I/O supplies
• DSP supplies
ISL6529CB
0 to 70
0 to 70
0 to 70
0 to 70
14 Ld SOIC
M14.15
Related Literature
ISL6529CBZ (Note)
ISL6529CR
14 Ld SOIC (Pb-free) M14.15
• Technical Brief TB363 Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)
16 Ld 5x5 QFN
L16.5x5B
L16.5x5B
ISL6529CRZ (Note)
16 Ld 5x5 QFN
(Pb-free)
ISL6529EVAL1
Evaluation Board
*Add “-T” suffix for tape and reel.
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both
SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2005. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.