ISL59114
®
Data Sheet
September 21, 2006
FN6184.2
YC (S-video) to Composite Video Driver
with LPF
Features
• 3rd order 9MHz reconstruction filter
• 40V/µs slew rate
The ISL59114 is a YC (S-video) reconstruction filter with a
-3dB roll-off frequency of 9MHz and summer amplifier to
create the composite video signal. Operating from a single
supply ranging from +2.5V to +3.6V and drawing only 4.5mA
quiescent current, the ISL59114 is ideally suited for low
power, battery-operated applications. Additionally, an enable
pin shuts the part down in under 14ns.
• Low supply current = 4.5mA
• Maximum Power-down current <0.5µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
The ISL59114 is designed to meet the bandwidth and very
low power requirements of battery-operated communication,
instrumentation, and modern industrial applications such as
video on demand, cable set-top boxes, MP3 players, and
HDTV. The ISL59114 is offered in a space-saving µTQFN
Pb-free package guaranteed to a 0.6mm maximum height
constraint and specified for operation from -40°C to +85°C
temperature range.
• µTQFN package
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• MP3 players
Pinout
ISL59114
(10 LD µTQFN)
TOP VIEW
GND
10
• HDTV
• Personal video recorder
Y
Y
OUT
9
1
2
IN
Block Diagram
EN
CVBS
8
CLAMP
OUT
+
-
C
C
3
4
7
IN
OUT
65mV
-
YIN
9MHz
9MHz
+
x2
x2
x2
YOUT
1uA
EN
CY
EN
500mV
6
CVBS
65mV
-
+
CIN
COUT
5
ENCY
VDD
+
+
65mV
ENCLAMP
ENCVBS
-
+
CVBSOUT
Ordering Information
PART NUMBER (Note)
PART MARKING
TAPE AND REEL
TEMP. RANGE (°C)
PACKAGE (Pb-Free)
PKG. DWG. #
L10.2.1x1.6A
ISL59114IRUZ-T7
FJ
7”
-40 to +85
10 Ld µTQFN
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.