ISL59116
®
Data Sheet
September 21, 2006
FN6277.0
YC to Composite Video Driver with LPF
Features
The ISL59116 is a YC reconstruction filter with a -3dB roll-off
frequency of 9MHz and summer amplifier to create the
composite video signal. Operating from single supplies
ranging from +2.5V to +3.6V and drawing only 4.6mA
quiescent current, the ISL59116 is ideally suited for low
power, battery-operated applications. Additionally, an enable
high pin shuts the part down in under 14ns.
• 3rd order 9MHz reconstruction filter
• 40V/µs slew rate
• Low supply current = 4.6mA
• Power-down current less than 1µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
The ISL59116 is designed to meet the needs for very low
power and bandwidth required in battery-operated
communication, instrumentation, and modern industrial
applications such as video on demand, cable set-top boxes,
MP3 players, and HDTV. The ISL59116 is offered in a
space-saving WLCSP chipscale package guaranteed to a
0.57mm maximum height constraint and specified for
operation from -40°C to +85°C temperature range.
• WLCSP package
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• MP3 players
Pinout
ISL59116 (WLCSP)
TOP VIEW
1
2
3
A
B
C
• HDTV
C
GND
EN
C
OUT
• Personal video recorder
IN
Block Diagram
EN
CLAMP
CVBS
OUT
+
-
65mV
-
Y
C
Y
OUT
+
x2
x2
x2
9MHz
9MHz
IN
500mV
5µA
Y
V
Y
OUT
IN
DD
65mV
-
+
C
OUT
IN
65mV
+
+
EN
CLAMP
EN
-
+
CVBS
OUT
Ordering Information
PART NUMBER
(Note)
PART MARKING
116Z
TAPE AND REEL
TEMP RANGE (°C)
PACKAGE (Pb-Free)
PKG. DWG. #
W3x3.9A
ISL59116IIZ
7”
-40 to +85
WLCSP
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.