ISL59311
®
Data Sheet
April 4, 2007
FN6372.2
Differential Video Amplifier with Common
Mode Sync Encoder and Serial Digital
Interface
Features
• Fully differential inputs, outputs, and feedback
• 650MHz -3dB bandwidth
The ISL59311 is a high bandwidth triple differential amplifier
with integrated encoding of video sync signals. The inputs
are suitable for handling high speed video or other
communications signals in either single-ended or differential
form, and the common-mode input range extends all the way
to the negative rail enabling ground-referenced signaling in
single supply applications. The high bandwidth enables
differential signaling onto standard twisted-pair or coax with
very low harmonic distortion, while internal feedback
ensures balanced gain and phase at the outputs reducing
radiated EMI and harmonics.
• 1500V/µs slew rate
• -70dB distortion at 20MHz
• Single 5V operation
• 50mA minimum output current
• Low power: 57mA total supply current
• Pb-free plus anneal available (RoHS compliant)
Block Diagram
Embedded logic encodes standard video horizontal and
vertical sync signals onto the common mode of the twisted
pair(s), transmitting this additional information without the
requirement for additional buffers or transmission lines. The
ISL59311 enables significant system cost savings when
compared with discrete line driver alternatives.
VCCA
VCCD
VCCA domain
VINA+
VINA-
+
-
VOUTA+
VOUTA-
Disable
The digital block of the chip is a data transceiver which is
intended to drive one twisted pair line. The maximum
baudrate for this block is 50Mbps.
V
INB+
+
-
VOUTB+
VOUTB-
V
INB-
CMA
CMB
HSYNC
VSYNC
Sync to
Common Mode
Translation
The ISL59311 is available in a 32 Ld QFN package and is
specified for operation over the -40°C to +85°C temperature
range.
CMC
+
-
V
OUTC+
V
INC+
Applications
V
INC-
VOUTC-
• Twisted-pair drivers
VCCS domain
VCCD domain
VCCS
• Differential line drivers
• VGA over twisted-pair
Transmit
SOUT+
• Transmission of analog signals in a noisy environment
TXDATA
RXDATA
SDATA
Ordering Information
SOUT
-
PART
NUMBER
(Note)
PART
MARKING REEL
TAPE & PACKAGE
(Pb-Free)
PKG.
DWG. #
SIN
+
-
+
-
SIN
ISL59311IRZ
59311 IRZ
-
32 Ld QFN L32.5x6A
32 Ld QFN L32.5x6A
ISL59311IRZ-T13 59311 IRZ
13”
GNDA
GNDD
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006, 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.